Turbo Bright Function; No Show Function; P-Timer Function; Sound Adjustment - Canon LV-7565F Owner's Manual

Canon multimedia projector owner's manual model lv-7565 lv-7565f

Hide thumbs

Table Of Contents

Table of Contents

BASIC OPERATION

Turbo Bright System enhances picture brightness. When BRIGHT

button is pressed to on, the message "Bright on" is displayed and

BRIGHT button lights orange. To return to original picture brightness,

press BRIGHT button again.

✽ When Turbo Bright System is set to on, the color of image may

change slightly.

Press NO SHOW button on Remote Control Unit to black out image.

To restore to normal, press NO SHOW button again or press any

other button.

Press P-TIMER button on Remote Control unit. Timer display "00 : 00"

appears on screen and timer starts to count time (00 : 00 ~ 59 : 59).

To stop P-TIMER display, press P-TIMER button. And then, press P-

TIMER button again to cancel P-TIMER function.

DIRECT OPERATION

Volume

Press VOLUME (+/–) button(s) on Top Control or on Remote Control

Unit to adjust volume. Volume dialog box appears on screen for a few

seconds.

(+) button to increase volume, and (–) button for decreasing.

Mute

Press MUTE button on Remote Control Unit to cut off sound. To

restore sound to its previous level, press MUTE button again or press

Volume (+/–) button(s).

MENU OPERATION

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT buttons to move a red frame pointer to

SOUND Menu icon.

Press POINT UP/DOWN button to move a red frame pointer to

item that you want to select, and then press SET button.

Volume

To increase volume, press POINT RIGHT button, and press POINT

LEFT button for decreasing.

Built-in SP.

Press POINT LEFT/RIGHT button(s) to switch built-in speaker on and

off.

Mute

Press POINT LEFT/RIGHT button(s) to cut off sound. Dialog box

display is changed to "On" and sound is cut off. To restore sound to

its previous level, press POINT LEFT/RIGHT button(s) again.