Snmp - Canon imageCLASS MF5770 Remote Ui Manual

SNMP

The SNMP helps you monitor the state of the machine and collects its information.
The following two items can be set:
■ COMMUNITY NAME
Sets the SNMP community name. You can specify up to two community names.
■ SNMP WRITABLE
2 Allows the PCs on the network to access the machine and modify its settings if this item is
activated. You can specify this setting for each community separately.
1
Press [Menu].
2
Press [ (-)] or [ (+)] to select <NETWORK SETTINGS> ➞ press
[Set].
3
Press [ (-)] or [ (+)] to select <LAN SETTINGS> ➞ press [Set].
4
Press [ (-)] or [ (+)] to select <SNMP SETTINGS> ➞ press [Set].
5
Press [ (-)] or [ (+)] to select <ON> ➞ press [Set].
6
Specify the SNMP port number (default: 161) using the numeric
keys ➞ press [Set].
7
Press [ (-)] or [ (+)] to select <COMMUNITY NAME 1> (default:
public) or <COMMUNITY NAME 2> ➞ press [Set].
8
Enter the SNMP community name using the numeric keys ➞ press
[Set].
9
Press [ (-)] or [ (+)] to select <SNMP WRITABLE 1> or <SNMP
WRITABLE 2> ➞ press [Set].
2-24
Additional Protocol Settings