Table of Contents
Advertisement
Appendix
A
Technical data
Technical data – General
Product type
Type of installation
Inside of the cylinder
Operating mode
Nominal capacity
Maximum temperature at the out-
let
Energy-saving mode
Temperature limit possible
Mixed water volume at 40 °C *
Maximum operating pressure
Product dimensions, width
Product dimensions, depth
Product dimensions, height
Net weight
Weight when filled with water
* The mixed water volume with an operating temperature of 40 °C results from adding cold water to the water in the cylinder,
which has a temperature of 65 °C, when the unit is ready to operate.
Technical data – Electrics
Electric connection
Energy consumption in standby
mode/24 hours
Level of protection
Safety
0020244342_01 eloSTOR plus Installation and maintenance instructions
VEH 10/7 U
Direct electric do-
mestic hot water cyl-
inder with system
for supplying one or
more draw-off points.
Setting up below the
work surface
Enamelled steel
Single-circuit unit
10 l
80 ℃
60 ℃
–
40 ℃
–
60 ℃
17 l
0.7 MPa
(7.0 bar)
290 mm
284 mm
482 mm
8.05 kg
18.05 kg
VEH 10/7 U
230 V / 50 Hz
0.333 kWh
IP 24 D
Radio-shielded, does
not affect the mains
supply
Appendix
11
Advertisement
Table of Contents
