Table of Contents
Advertisement
Appliance settings
en
Notes
When dosing all detergents,
■
cleaning aids and cleaning agents,
always follow the manufacturer's
instructions.
If dosing detergent manually, do not
■
add additional detergent to the
intelligent dosage dispenser (set
intelligent dosage to "off" ö). This will
prevent overdosing and foaming.
Dilute viscous fabric softener and
■
fabric conditioner with water to
prevent blockages.
Dosing and adding detergent:
Pull out the detergent drawer.
1.
Add the correct dosage to
2.
compartment v u depending on:
– Soiling
– Water hardness (ask your water
supply company)
– The amount of laundry
– The manufacturer's instructions
Close the detergent drawer.
3.
46
Q
Appliance settings
Y ou can change the following settings:
A p p l i a n c e s e t t i n g s
The volume of the buttons and the
■
information signals (e.g. at the end
of the programme)
Select/deselect the appliance's
■
automatic switch-off function
~ Page 12
Switch the drum-care information
■
signal on/off (depending on the
model).
You will need to activate the setting
mode in order to change these settings.
Activating the setting mode
Press the # button.
1.
The appliance is switched on and
the Cottons programme is shown at
position 1.
Press the Temperature °C s button
2.
and, at the same time, turn the
programme selector clockwise to
position 2. Release the button.
The setting mode is activated and the
preset volume for the information
signals appears in the display panel.
You can now change the settings:
Advertisement
Table of Contents
