Using The Software On A Macintosh; Connecting The Camera And Macintosh And Viewing Images - FujiFilm Finepix 40i Quick Start Manual

Using the Software on a Macintosh

Connecting the Camera and Macintosh and Viewing Images

✽
Refer to the Owner's Manual for your camera for information on using the camera.
1. Start up your Macintosh.
2. Load a media containing photographed images
into your camera, switch the camera on and set the
Mode dial to "Playback" mode.
NOTE
Use media that contain photographs shot on a FUJIFILM digital camera.
3. Use the USB cable to connect the
camera to your Macintosh. If a
removable disk icon appears on
the desktop, the camera and
Macintosh are correctly connected.
4. Double-click the Exif Viewer icon
to start up the software. The main
window shown below appears.
5. When you select (click)
"Untitled" disk →
"DCIM" → "100_FUJI"
from the list displayed
on the left side of the
main window,
thumbnails of the
images recorded on the
media are displayed in
the thumbnail display
area on the right side of
the main window.
32
<Main window>
6. When you double-click a thumbnail image directly,
the image is displayed in an Image window.
The Image window closes when the Close box in
the main window is clicked.
You can also copy an image to the hard disk by
selecting the thumbnail image dragging it onto the
desktop.
NOTE
• Do not use the camera while it is being accessed by the PC.
Do not perform any of the following operations during camera access as this
could result in damage to the data on the media or damage to the media itself:
Switch the camera off/Touch any of the camera operation buttons/Disconnect the
USB cable/Remove the media/Open the media cover/Remove the camera batteries
• Do not format the SmartMedia in the camera on your PC. Doing so may prevent
you from using this SmartMedia to take pictures.
7. Select "Quit" from the File menu or click the Close
box to exit Exif Viewer.
✽
For more information on using Exif Viewer or DP Editor, refer to the User's Guide
(PDF document) on the CD-ROM.
8. Drag the removable disk icon on the desktop to the
Trash or select the icon and then select "Eject"
from the Special menu in the menu bar at the top
of the window.
9. When the remove allowance displayed, disconnect
the USB cable and remove the media.
NOTE
• Removing the media or switching off the camera without "ejecting" the
removable disk icon could damage the media or cause your Macintosh to hang.
• If you are using a media that was formatted on the camera and you replace a
folder on the media with a folder with the same name on your hard disk, the
files may be corrupted. Delete the folder on the media or change the folder
name before copying the data.
Macintosh
33