Ex version 3.1 for windows and macintosh (55 pages)
Summary of Contents for FujiFilm BB10768-301(1)
Page 1
Exif Launcher Quick Start Guide Thank you for purchasing these FUJIFILM products. This Quick Start Guide provides you with a simple summary of how connect your PC and camera via the USB ports and how to install the software provided in this package on your personal computer (PC).
Agreement. 1. Definitions. (a) “Media” means the CD-ROM titled “Utilities for Fujifilm Digital Camera” which is provided to you together with this Agreement. (b) “Software” means the software which is recorded on Media.
Contents IMPORTANT ... 2 Contents ... 4 Introduction ... 5 Software Overview ... 5 Installation on a Windows PC... 6 Pre-installation Checklist ... 6 Installing the Software ... 7 Installing the USB Driver... 7 Windows 98 ... 8 Windows Millennium Edition ... 10 Windows 2000 Professional ...
: Amount required for installation: 60 MB minimum Amount required for operation: 110 MB minimum Supported cameras : Fujifilm digital cameras equipped with a USB interface NOTE • Connect the PC and digital camera directly using the USB cable. Connecting via USB hub is not guaranteed.
Windows 98 6. The “Add New Hardware Wizard” dialog appears. Click [Next >]. NOTE If this Wizard doesn’t appear, update the USB driver (See P.20). 7. Select “Search for the best driver for your device (Recommended)” and click [Next >]. 8.
Windows Millennium Edition 6. The “Add New Hardware Wizard” window opens. Click the [Next >] button. NOTE If this Wizard doesn’t appear, update the USB driver (See P.20). 7. When the “Select Other Driver” window opens, select USB Mass Storage in the \USBDRV \WIN98\USBS04CB.INF line on the CD-ROM drive and then click the...
10. Select \USBDRV\WIN2KPRO on the CD-ROM drive and click the [Open] button. Click one of the icons on the left to simplify location selection. 11. Click the [OK] button in the location specification dialog box. 12. Check that UW2K04CB.INF has been detected and then click [Next >].
Page 8
Exif Viewer, DP Editor, QuickTime and Exif Launcher are installed sequentially. To stop the installation process, click the [Cancel] button. The current setup program stops and installation skips to the next application program. 3. Double-click “Viewer” in the CD-ROM window. When the “Viewer”...
Mode dial to “Playback” mode. NOTE The media used should contain images shot using a FUJIFILM camera. 3. Connect the camera and PC using the USB cable. When the “Removable Drive” icon appears in the “My Computer”...
Page 10
If Exif Viewer and Exif Launcher are installed, Exif Viewer starts up and the window shown here appears. • When you install Exif Launcher, it is registered in the startup menu and is launched automatically when Windows starts up. To quit Exif Launcher, click the right mouse button on the [ ] icon in the taskbar and select “Exit”...
Updating the USB Driver on a Windows PC Update the USB Driver in the following situations: (1) When you want to upgrade the driver version (2) When you have installed the driver but the software does not run Updating the USB Driver for Windows 98 and Windows Me 1.
: Amount required for installation: 60 MB minimum Amount required for operation: 110 MB minimum Supported cameras : Fujifilm digital cameras equipped with a USB interface NOTE • Connect the Macintosh and digital camera directly using the USB cable. Connecting via USB hub is not guaranteed.
Installing the Software Installing the USB Driver 1. Switch on your Macintosh and start up Mac OS. 2. Version verification and updating for iMac. If you are using an iMac, an update may be necessary to ensure that USB operates stably. Updating is not required on other models. Use the procedure below to check whether updating is required.
5. Connect the camera to your Macintosh. 1 Load the media into the camera, switch the camera on and set the Mode dial to “Playback” mode. NOTE Some cameras support storage media other than SmartMedia. 2 Use the USB cable to connect the camera to the USB port on your Macintosh. NOTE •...
Using the User’s Guide To read the User’s Guide supplied on the CD-ROM, you must have Adobe Systems’ Acrobat Reader installed. Installation of Acrobat Reader 1. Switch on your Macintosh. 2. Load the CD-ROM into the CD-ROM drive on your Macintosh. 3.
6. When you double-click a thumbnail image directly, the image is displayed in an Image window. The Image window closes when the Close box in the main window is clicked. You can also copy an image to the hard disk by selecting the thumbnail image dragging it onto the desktop.
Troubleshooting If problems arise and the USB Driver is not running correctly, check the items listed below. The camera and PC are connected but no removable disk icon is displayed. I Is the camera switched on? Solution: Switch the camera on. Refer to the Owner’s Manual supplied with the camera for details.
Windows-specific Problems The camera is connected to my PC but the driver installation will not start. I Is the camera switched on? Solution: Switch the camera on. Refer to the Owner’s Manual supplied with the camera for details. I Is the camera set to USB connection mode? Solution: Some cameras have to be set to a proper mode (eg.
My PC does not shut down correctly. I Some PCs will not shut down correctly while the FUJIFILM Digital Cameras is still connected to the USB interface. ✽ Solution: In future, use the correct procedure to disconnect the USB cable connecting the FUJIFILM Digital Cameras to your computer before quitting Windows.