Advertisement
Quick Links
Instruction Disclaimer
Dennis Kirk provides instructions to help our customers better understand how to install the
products we sell. The instructions are exact copies of what the manufacturer includes with the
product being sold.
That means the quality and accuracy of the instructions is solely dependent on what the
manufacturer produces. We do our best to make the text legible and the pictures viewable.
However, the end result depends largely on the quality of instructions the manufacturer
provides.
Therefore, you will find that some instructions are not of the highest quality. Sometimes text is
hard to read and pictures are not easy to see. At times you will find the overall look of the
instructions to be less than professional. However, we feel it is better to provide what we have
rather than provide nothing at all.
To the best of our knowledge the instructions and application information contained in the
instructions is accurate. However, Dennis Kirk assumes no liability related to any errors that
may be contained in the copy of the manufacturer's instructions we provide. Buyers are solely
responsible to insure that product use is consistent with their application.
If you have any questions please contact us at
customerservice@denniskirk.com
or
800-969-7501 so we can further assist you regarding additional product information or any other
business related questions.
Thank you for doing business with Dennis Kirk.
Advertisement
Related Manuals for Rockford Fosgate RFRZ-FWE
Summary of Contents for Rockford Fosgate RFRZ-FWE
- Page 1 Instruction Disclaimer Dennis Kirk provides instructions to help our customers better understand how to install the products we sell. The instructions are exact copies of what the manufacturer includes with the product being sold. That means the quality and accuracy of the instructions is solely dependent on what the manufacturer produces.
- Page 2 Installation assistance available at: www.rockfordfosgate.com/rftech FRONT ® SUBWOOFER ENCLOSURE RFRZ-FWE Serial Number: Date of Purchase: 600 South Rockford Drive • Tempe, Arizona 85281 United States Direct: (480) 967-3565 • Toll Free: (800) 669-9899 Installation & Operation R O C K F O R D F O S G A T E . C O M...
- Page 3 12 Warranty ©2015 Rockford Corporation. All Rights Reserved. ROCKFORD FOSGATE and associated logos where applicable are registered trademarks of Rockford Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. Specifications subject to change without notice.
- Page 4 Enclosure Assembly 28.5” (724mm) 14.7” 12.5” (374mm) (318mm) TOP VIEW PASSENGER SIDE (RIGHT) FRONT VIEW DRIVER SIDE (LEFT) TYPICAL ASSEMBLY Mounting Bracket and Bolts Mounting Bracket and Bolts Subwoofer Mounting Bracket (Not Included) and Bolts Subwoofer Enclosure Fig. 1...
- Page 5 • This front subwoofer enclosure is specifically designed to work with Rockford Fosgate’s Element Ready 10” subwoofers. • With the addition of an amplifier or source unit, be sure that your current charging system is in proper working order.
- Page 6 Installation Using your hands, pull the top dash piece toward the interior of the vehicle to release it from the dash. Step 4 - Remove Center Pocket Using a Torx screwdriver, remove the bolt that attaches the brace to the rear of the pocket. Disconnect all of the wires connectors and set aside.
- Page 7 Installation Once the bolts are removed you will need to pull the dash off of the Once the glove box door is removed, remove the bolts holding the chassis. glove box in place. There are two above the chassis dash bar. NOTE: When pulling the dash off you will notice that it still feels attached.
- Page 8 Installation Place the subwoofer into the enclosure and line up the predrilled Step 8 - Install Steering Column Bracket holes in the enclosure with the subwoofer’s mounting holes. You will need to loosen the two nuts that are located above the NOTE: If you subwoofer mounting holes do not line up, predrilling steering column.
- Page 9 Installation Step 9 - Replace Center Pocket Bracket Step 11 - Install the Loaded Subwoofer Enclosure The center pocket bracket will need to be removed and replaced Once all of the brackets are installed, the subwoofer enclosure with a new bracket that comes with the kit. can now be installed.
- Page 10 Installation NOTE: Due to the weight of the enclosure and subwoofer, an additional person to help is recommended. Step 12 - Install Glove Box Door After all of the brackets are tight and secure, the glove box door will need to be installed onto the enclosure. Insert the door stud towards the passenger side retainer first, then insert the stud on the passenger side.
- Page 11 Installation Step 13 - Install Dash Now you can install the dash back into place. Step 14 - Install Center Pocket After you have the dash installed, the center pocket can go back in the vehicle. Be sure to slide the pocket support onto the new stud from the enclosure.
Need help?
Do you have a question about the RFRZ-FWE and is the answer not in the manual?
Questions and answers