WCM CTX8010 Operations & Parts Manual page 39

Replace the battery
There is a 12V battery with one negative pole (-) grounded.
If battery cannot be charged or store any electricity, replace the battery with same model.
Replace the fuse.
If the electrical device does not work, please firstly check the fuse.
Important: please install the fuse with correct amperage, so as to prevent against burning of electrical system due
to overloading!
Others
Parts
Check if the bucket teeth is worn or
loosened.
Change the bucket
Replace the bucket and connect the
new one to machine.
Adjust the connecting rod of bucket
Take down the traveling lever
Check and replace the fuse
Check the track defection
Maintenance of tensioner
Check the fuel injection timing
Measure the compression pressure of
engine
Check the starter and the A/C
generator
Check the bolts and nuts for
tightening torque
Note:
★ Maintenance interval under normal conditions
 Maintenance needed at the first inspection
 Contact dealers or Rhinoceros.
Check the bucket teeth --- each day
1. Check if the bucket teeth is worn or loosened.
Worn beyond the service limit, the bucket teeth may be replaced.
Quantity
—
—
1
2
1
2
2
—
—
—
—
Bucket tooth dimensions mm
New
190
10 50 100 250
★
If needed, replace the bucket and connect the new one to
★
★

37
Interval (h)
500 1000 2000
If needed
machine.
If needed
If needed
Every 3 years
★
★
If needed


Service limit
130
4000