Tool List - Reynolds Building Systems Best Barns Denver Assembly Book

I
MPORTANT
Download the most current instruction book at www.barnkits.com; use the "manuals"
link on the menu bar and then select your building kit and size.
Thank you for purchasing our shed kit.
of the building. If you have any questions about assembling the kit, call 800-245-1577.
Business hours (8:00-5:00 ET) Monday thru Friday. After business hours call 724-866- 4357.
or email to help@barnkits.com.
The material that is included in our kit is listed on the back page. The optional floor package,
if purchased, will be supplied by a local lumber supplier.
Our kit does not include the shingles, the quantity needed is listed on the back page. The
siding is primed. You will need to apply a finish coat using latex acrylic paint.
Some of the framing lumber was used in the shipping pallet. Unpack the material from the
pallets. Unscrew the OSB panels and the 2x4s from the shipping pallet. The 2x4s will be
used for wall bracing and to support the loft beams. The bit for the screws is packed in the
hardware bag.
Most buildings are installed on a wood floor and the siding was designed to extend over the
wood flooring. If the foundation is a concrete floor cut the siding flush with the bottom of
the wall plate to prevent the concrete from contacting the siding.
Stacking the boards, according to size, will make them easier to find when needed. Do Not
discard any material until your building is complete.
Before you begin construction, be sure to study this assembly manual. Also, obtain a building
permit and check all pertinent building code regulations for your area.
Thank you for your purchase.
To identify which edge we want you to use,
we will refer to the edge as either the 'LAP'
Edge or the Tongue Edge.
measure from here

Tool List

Always wear safety glasses when cutting or nailing!
I
NFORMATION
Read the instructions before starting the assembly
When measurements are given for a board
length or width, it is from the longest side.
Hammer & Hand Saw
Framing Square & Level
Power Circular Saw
A Y
BOUT OUR
Tongue Edge
Power Drill/screwdriver
Measuring Tape
2-8' Step Ladders
S K
HED IT
LAP Edge