Advertisement
HOW TO INSTALL BATTERIES
MAIN UNIT
Firstly, make sure your Friends & Family Home Safety Alert is switched off. Slide down the front cover of the
main unit and install 4 x AA batteries observing the correct polarity. Replace the front cover, ready for use.
PENDANT
Both pendants are supplied with a CR2032 battery installed. Should you need to replace these batteries,
use a small philips head screw driver to remove the screw on the reverse of the pendant followed by the
cover. Remove the old battery and replace with a new CR2032 battery. Replace the cover and secure it
with the screw. After the battery is installed you will need to follow the instructions outlined in the next step
"PAIRING THE PENDANT TO THE MAIN UNIT".
PAIRING THE PENDANT TO THE MAIN UNIT
Ensuring the batteries are correctly installed, start by switching the main unit power switch to ON. You
will hear one beep and a red light will come on to show the main unit is working correctly. Remove the
front cover of the main unit by carefully sliding it downwards. Press and hold the small black setting
button located in the middle of the battery compartment. With the setting button held down, press the call
button on the pendant in unison. You will hear a beep to confirm that the pairing is successful. Repeat this
procedure to pair the second pendant.
HOW TO OPERATE THE HOME SAFETY ALERT
Once you have installed the batteries and have ensured the pendants are correctly paired, pressing the call
button the either of the pendants will trigger an alarm and a flashing light on the main unit. Either a green or
yellow light will show on the main unit to distinguish which pendant has been pressed. A yellow light is for
pendant number 1 and a green light is for pendant number 2. Each pendant also has its own alarm sound
sequence.
To stop the alarm, press the RESET button on the main unit.
POWER INDICATORS
MAIN UNIT
If the batteries on the main unit are running low a red light will flash every 10 seconds. Please replace the 4
x AA batteries at your earliest convenience.
PENDANTS
If the LED on the pendant starts to dim or the operating distance is reduced, the battery requires replacing.
Follow the steps "HOW TO INSTALL BATTERIES" followed by "PAIRING THE PENDANT
TO THE MAIN UNIT" at your earliest convenience.
VOLUME ADJUSTMENT
The alarm volume of your Friends & Family Home Safety Alert can be adjusted to three different levels (high,
medium and low). To change the volume level, press the small black setting button located in the
middle of the battery compartment repeatedly until the desired volume is set.
A power adaptor for the main unit is available to purchase separately under code 672.1.
Name:
Address:
Telephone:
Email:
Retailer:
Date of Purchase:
Model No:
We would like to keep you up to date with other helpful products. If you would rather we did not, please tick here.
Lifemax Limited - 1 Pipers Court, Thatcham, Berkshire, RG19 4ER
1611 - 1611IM191216.indd 2
www.lifemaxuk.co.uk - Please retain for reference
2
19/12/2016 11:45:43
Advertisement
