1. General Description
The SecoVac Vacuum Circuit Breaker (VCB), Voltage
Transformer (VT) tray, Control Power Transformer (CPT) tray,
and Ground and Test (G&T) device should only be handled
with Lift Truck during installation and removal. The lift truck
allows the before mentioned parts to be elevated to the top or
bottom compartment in the SecoGear switchgear or SecoBloc
OEM Modules, Figure 1.
Figure 1. Lift Truck and SecoVac VCB
Floor Lock
For additional safety during the handling of the SecoVac VCB
or the other components, the lift truck is equipped with a floor
lock, Figure 2.
Figure 2. Floor Lock
Compartment Interlock
The compartment interlock will lock the lift truck to the
SecoGear switchgear or SecoBloc OEM Module compartment
for a safe transfer to and from the equipment during
installation or removal, Figure 3.
Figure 3. Compartment Interlock
Hand Winch
The hand winch is connected to a system of pulleys on both
sides of the lift truck to facilitate the lifting or lowering the
SecoVac VCB, VT & CPT trays, and G&T device. The system is
designed for a 700lbs lifting capacity, Figure 4.
Figure 4. Hand Winch
SecoVac Lift Truck – Operation Manual 4 of 12