Hardware Installation; Mechanical Diagram; Ip67 Cable Gland Installation; Cable Gland Description - B&B Electronics Zlinx Xtreme ZXT9-RM Manual

3.0 Hardware Installation

3.1 Mechanical Diagram

The mechanical diagram in Appendix C contains information for mounting your radio modem.
NOTE: the Cable Glands cannot be used for Class 1 Division 2 applications. Please see
the Quick Start Guide for UL Class 1 Division 2 installation instructions.

3.2 IP67 Cable Gland Installation

3.2.1 Cable Gland Description

The Cable Gland is used to maintain the water tight rating while allowing a cable to enter
the enclosure. The assembly consists of black molded nylon body, hex nut, cable nut and
a rubber gasket and cable seal.
Figure 3-3
Figure 3-4
Section Three – Hardware Installation
IP67 Cable Gland
IP67 Cable Gland
Page
13
Document Number: pnZXTxRM-0712m