Procedure For Hardware Installation - Keebox W150NR User Manual

Enable
"Wireless"
and WPS
Reset

1.6 Procedure for Hardware Installation

Step 1 Insert the Ethernet cable into LAN
Port:
Insert the Ethernet patch cable into LAN port
on the back panel of Router, and an available
Ethernet port on the network adapter in the
computer you will use to configure the unit.
Step 2 Insert the Ethernet patch cable into
Wired WAN port:
Insert the Ethernet patch cable form DSL
Modem into Wired WAN port on the back panel
of Router.
Step 3 Power on Router:
Connect the power adapter to the receptor on
the back panel of your Router.
Description
1. When Wireless is off, press this button (about 1 sec) to enable
"Wireless Radio".
2. When Wireless is On, press this button (about 1 sec)to execute
WPS function.
Press (6) sec to reset to default when the device works
simultaneously.
9