Canon DM-MV300E Manual page 7

Relation with the viewfinder (EVF)
LCD Panel Positioning
With the panel closed
(the panel surface facing the main body)
With the panel closed
(the panel surface facing outside)
With the panel opened
In the self-shooting mode*
*1 : Can be set as a mirror in the menu.
In the mirror mode (when in the recording search, etc. playback screen output, the mirror mode is temporarily canceled.)
5-9 White balance adjustment
Adjustment range
5-10 Digital features
5-10-1 Fader
Fading time
5-10-2 Effects
5-11 Internal microphone
5-11-1 Wind reduction function
5-12 Additional functions
5-12-1 Time code
5-12-2 Data code
Time & date
Camcorder information
5-12-3 Accessory shoe
5-12-4 Recording search function
5-12-5 Recording review function
5-12-6 Zero set memory
5-12-7 Remote control on/off
5-12-8 Self timer
5-12-9 Headphone volume
6 Recorder
6-1 Recording function
6-1-1 Recording format
6-1-2 Tape speed
6-1-3 DV input recording
6-1-4 Analog input recording
CHAPTER 1. GENERAL DESCRIPTION OF PRODUCT
Camera Mode
LCD Panel EVF
OFF ON
ON OFF
ON OFF
ON*1 ON
TTL 64-section with the new white extraction type FAWB. With the Set, Preset (outdoors :
5,600K ; indoors : 3,200K) features (selection in the camera menu).
2,800 K to 8,000K
There are such modes as fading and effects. Fading : When combining with the Start/Stop
button, can be once executed while the fading mode indication is on (the mode indication
disappears after fading is completed). Effects : Remain on until turning them off.
Operable only in the movie picture mode (cannot be executed in the photo mode). Fading
simultaneously with sound. Auto fading (domestic model : white fading ; overseas model :
black fading), vertical wipe. horizontal wipe, mosaic fading.
Approx. 4 sec.
Art, black&white, sepia, mosaic. The mode indications appear while executing the effects ;
when the mode indications blink, it means that the effects are off. The effect functions are
toggled on/off by pressing the D.E. ON/OFF button.
Stereo microphone (electret condenser microphone) Omnidirectional microphone ×2+stereo
via an electronic circuit
Provided. With an ON/OFF switch (menu selection ; for the internal microphone only)
The recording time (0 : 00 : 00-7 : 59 : 59 : 59) is being displayed, recorded in the sub-code
area.
Not displayed in the recording mode, however the date and the camera information are re-
corded and can be displayed during playback.
Period covered : 1 January 2000 to 31 December 2050 (factory preset to 1 January 2000).
World clock (by selecting cities names while traveling, appropriate date and time are set auto-
matically ; summer time). 3 display modes can be displayed while playing back : date, date &
time, or time (covered range : 1 January 1990 to 31 December 2089).
Recording the shutter speed, aperture value (no display while recording), can be displayed
while playing back.
Provided
Available. While in the recording pause mode, it is possible to check the picture by playing the
tape forward/reverse using the recording search buttons.
Available. While in the recording pause mode, operate the recording check button (
Available. It is possible to fast forward or rewind the tape to the point where the zero set
memory key of the WL-D74 was pressed (the counter is set to 0 : 00 : 00) (when recording only
zero setting is available. This function can be used in the playback mode).
Available. Possible during shooting, in the VCR mode (menu selection).
Available. 10 sec. Note : 2 sec. possible while operating with WL-D74 wireless controller.
Adjustable by multi dial.
Camera recording, DV input recording (DM-MV300i only)
Digital DVC for commercial use (SD specifications)
Approx. 18.83 mm/s (SP mode); approx.12.57 mm/s (LP mode)
In confirmity to IEEE1394 (DM-MV300i only)
Recording of video and audio signals from a digital video camera connected with a DV cable
None
1-9
DM-MV300E/MV300iE/MV310E
VTR Mode
LCD Panel EVF
OFF ON
ON OFF
ON OFF
ON OFF
).