Download Print this page

TEFAL ULTRAGLIDE PLUS Manual page 2

Advertisement

3.
3.
*
www.tefal.co.uk
* EN - Depending on model
1H
3X YEAR**
3X YEAR**
4
h
12X YEAR**
Click
Important safety recommendations
• Please read these instructions carefully before first use.
www.tefal.co.uk
This product has been designed for domestic and indoor
use only. Any commercial use, inappropriate use or
failure to comply with the instructions, the manufacturer
accepts no responsibility and the guarantee will
max.
not apply.
Max.
• Never unplug the appliance by pulling the power cord.
Always unplug your appliance: before filling the water
tank or rinsing the water tank, before cleaning the
appliance, after each use.
• The appliance must be used and placed on a flat, stable,
heat-resistant surface. When you place the iron on the
iron rest, make sure that the surface on which you place
it is stable.
• This appliance is not intended to be used by persons
(including children) with reduced or impaired physical,
sensory or mental capacities or persons lacking
Click
appropriate knowledge or experience, unless a person
responsible for their safety provides either supervision or
appropriate instructions concerning use of the appliance
prior to its use.
• Children should be supervised to ensure they do not play
2
min.
with the appliance.
• This appliance may be used by children aged 8 or over
and persons lacking appropriate knowledge or experience
1H
or persons with reduced or impaired physical, sensory
or mental capacities provided that they have been
NO
thoroughly instructed regarding use of the appliance, are
supervised, and understand the risks involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision. Keep the iron and its cord out of reach of
1820006078 - 38/20 -FV58XX G0
children less than 8 years of age when it is energized or
EN
cooling down.
• The surfaces of your appliance can reach very high
temperatures when functioning, which may cause
burns. Do not touch the hot surfaces of the appliance
(accessible metal parts and plastic parts adjacent to
the metallic parts).
• Never leave the appliance unattended when it is
connected to the mains. Before storing the appliance,
once it is unplugged, please wait until it has cooled down
(around 1 hour).
• The appliance must not be used if it has been dropped,
if it has any visible damage, if it leaks, or if it functions
abnormally in any way. Do not attempt to dismantle
your appliance: have it examined at an Approved Service
Centre to avoid any danger.
• The iron should only be used with the base provided (for
cordless irons).
• Check the electrical power for sign of wear or damage
prior to use. If the electrical power cord is damaged, it
must be replaced at an Approved Service Centre to avoid
any danger.
• The iron must always be placed on its base and never on its heel (for cordless irons)
• Your iron and its base must be used and placed on a stable surface. When you place the iron on its
base, ensure that the surface on which the base is placed is stable.
• For your safety, this appliance conforms to all applicable regulations (Low Voltage Directive,
Electromagnetic Compatibility, Environment, etc).
• Your steam iron is an electrical appliance: it must be used under normal conditions of use. It is
designed for domestic use only.
• Always plug your steam iron:
- into a mains circuit with voltage between 220 V and 240 V,
- into an earthed electrical socket.
Connecting to the wrong voltage may cause irreparable damage to the appliance and will invalidate
your guarantee. If you are using a mains extension lead, ensure that it is correctly rated (16A) with
an earth, and is fully extended.
• Completely unwind the power cord before plugging into an earthed socket.
• The soleplate of your iron can reach extremely high temperatures, and can cause burns: do not
touch them. Never touch the electrical power cords with the soleplate of the iron.
• Your appliance emits steam, which can cause burns. Always handle the iron with care, especially
when ironing vertically. Never direct the steam towards people or animals.
• Never immerse your steam iron in water or any other liquid. Never place it under a running tap.
• The plug must be removed from the socket-outlet before the water reservoir is filled with water.
Before first use
When you first use the iron, some smoke or a harmless odour may be produced or there may be a
small discharge of particles. This will not affect the use of the iron and will disappear quickly.
What water to use?
Your iron has been designed to use tap water. However, the self-clean function must be performed
regularly on the steam chamber to remove limescale.
If your water is very hard, mix 50% tap water and 50% bottled demineralised water.
Never use water containing additives (starch, perfume, aromatic substances, softeners, etc.), or
condensation water (for example water from tumble dryers, water from refrigerators, water from
air conditioning units, rainwater). This water contains organic waste materials or minerals that
concentrate under the effect of heat and cause spitting, brown colouring or premature ageing of
your appliance.
PLEASE RETAIN THIS INSTRUCTION
BOOKLET FOR FUTURE REFERENCE
Environment
Environment protection first !
 Leave it at a local civic waste collection point.
i Your appliance contains valuable materials which can be recovered or recycled.
Problems with your iron?
PROBLEMS
POSSIBLE CAUSES
SOLUTIONS
Water is leaking
You are using the steam when the iron is not hot
Wait for the indicator light to turn off.
from the holes in the
enough.
soleplate.
You are using the turbo steam button (turbo
Wait a few seconds between each use.
steam) too often.
You have stored the iron horizontally without emptying
See the chapter on "Storing your iron".
the water tank or setting the steam control to
.
The iron leaks at the
You have removed the anti-scale rod to fill your
Do not remove the anti-scale rod to fill the
start of ironing.
iron.
reservoir.
The steam control is not set on
when you fill
Ensure that the steam control is set on
when
the water reservoir.
you fill the water reservoir.
Drips from the soleplate
You are using chemical descaling agents.
Do not introduce a descaling agent into the
are staining clothing
water tank.
You are not using the right type of water.
Clean the steam chamber and see the chapter on
"Which water should I use?"
Clothing fibres are building up in the holes of the
Clean the steam chamber and the soleplate with
.
soleplate and burning.
a damp sponge. Periodically vacuum the holes
the holes in the soleplate. Please refer to the
"Cleaning the Iron" paragraph.
The soleplate is dirty or
You are using starch..
Clean the soleplate as indicated above. Spray
brown and may stain
the starch on the reverse side of the clothing to
clothing.
be ironed.
Your laundry has not been rinsed sufficiently or
Ensure that your laundry is sufficiently rinsed to
you are ironing a new item of clothing before
eliminate potential soap deposits or chemical
washing it.
products on new items of clothing.
You are not using the right type of water.
Refer to "Which water should I use?"
Your iron produces little
The water tank is empty.
Fill it up.
to no steam.
The anti-scale rod is dirty.
Clean the anti-scale rod.
Please refer to the "Cleaning the Anti-Scale Rod"
paragraph.
Your iron is clogged up with limescale.
Clean the anti-scale rod and / or clean the calc
collector. Please refer to the "Cleaning the Anti-
Scale Rod", "Cleaning the calc collector" and
"Cleaning the Iron" paragraphs.
Your iron has been used for too long in the dry
Cleaning the iron. Refer to "Descaling the steam
ironing function.
chamber" section.
The soleplate is
You have placed your iron on a metallic iron rest or
Always place your iron on its heel rest when not
scratched or damaged.
ironed over metal zips or fastners.
in use.
Do not iron over metal zips or fastners.
The iron steams once
The steam control is not set to
Ensure that the steam control is set to
.
.
the water tank has
been filled.
The water tank is too full.
Do not exceed the max level for filling.
The spray function does
The water tank is not full enough.
Add water to the water tank until max level.
not spray any water.
ULTRAGLIDE PLUS
ULTRAGLIDE ANTI-CALC PLUS
www.tefal.co.uk
Fore more information, please refer to :

Advertisement

loading

This manual is also suitable for:

Ultraglide anti-calc plusFv5846