Maker Factory ARDUINO MAKEVMA313 User Manual page 3

Compatible hall (holzer) magnetic switch module (2 pcs)

What is Arduino

Arduino

is an open-source prototyping platform based in easy-to-use hardware and software. Arduino

are able to read inputs – light-on sensor, a finger on a button or a Twitter message – and turn it into an output

– activating of a motor, turning on an LED, publishing something online. You can tell your board what to do by

sending a set of instructions to the microcontroller on the board. To do so, you use the Arduino programming

language (based on Wiring) and the Arduino

Surf to

www.arduino.cc

Overview

The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier that amplifies the

Hall voltage, a Schmitt trigger to provide switching hysteresis for noise rejection, and an open-collector

output.

voltage ..................................................................................................................... 5 VDC

connection .................................................... 3 pins, + (middle pin), - (ground) and S (signal)

output (S) ................................................................................... Schmitt Trigger, Active Low

activation .............................................................................................................. 30 gauss

deactivation .......................................................................................................... 10 gauss

LED indicator ............................................................................................ on when activated

dimensions ...................................................................................................... 25 x 15 mm

weight .......................................................................................................................... 2 g

All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to

any electronic medium or otherwise without the prior written consent of the copyright holder.

V. 01 – 07/11/2017

software IDE (based on Processing).

and

www.arduino.org

for more information.

Arduino

A10

+5 V

GND

MAKEVMA313

boards

Mf-4838310