Transport And Unpacking - Promeba PS-190 User Manual

USER MANUAL // ELECTRIC STAIR CLIMBING CHAIR PS-190
Review 03/19
02
INSTALATION
02.1

Transport and unpacking

First remove the packaging carefully so as not to dama-
ge the outside of the stretcher.
1. Transport
· Always fix the load, if it is necessary stack. you should
follow the diagram shown.
· Transport the level load and following all the precepts
and regulations regarding the transport of loads.
2. Unpacking
· Put the box on a flat and stable surface, open the seal
carefully not to damage inside.
· Remove the product from the inside of the case as
shown in the chart below.
Each product has been thoroughly inspected when
leaving the factory. To ensure that the transport has not
deteriorated it, please inspect the exterior and interior
carefully, and in the event of any damage, contact the
installer immediately.
PACKING UNIT
RESPECT THE PACKAGING TRANSPORT POSITION
UNPACKING THE PRODUCT
ALWAYS USE FLAT SURFACE
7