Page 2
TABLE OF CONTENTS TABLE OF CONTENTS ................................2 STANDARD REMOTE CONTROL ............................3 SYSTEM REMOTE CONTROL ..............................4 FRONT PANEL ..................................5 MENU SYSTEM ..................................6 MAINTENANCE ..................................7 COMPLIANCE ..................................8...
Page 3
STANDARD REMOTE CONTROL When the CDP-1 is selected as the SP-1´s input device, the Standard Remote Control will work like this: Toggles through RoomPerfect™ options. Skips forwards/backwards through CD tracks. Press to play/pause the CD. Adjusts the volume. Switches the system on and off.
Page 4
SYSTEM REMOTE CONTROL When the CDP-1 is selected as the SP-1´s input device, the System Remote Control will work like this: Switches the system on and off. VOLUME Turn the outer wheel to adjust the volume. Press to play/pause the CD.
Page 5
FRONT PANEL This describes the day-to-day operation of your system using the controls on the SP-1 Stereo Processor front panel. POWER Switches the system on and off. LEFT KNOB Rotate left and right to toggle between CD tracks and browse while in the menu. Press and hold to access the menu, press to select a menu item, press and hold to cancel.
Page 6
On is a 10 second display timeout. • Repeat One Track • Random Play Auto Off Auto off will automatically turn off the CDP-1 after it has been idle for 5 minutes. CD-Text Display Shows additional CD information (e.g. album name, song name, and artist) if available.
Page 7
This may cause damage to the system. Contact system. Use a micro fi ber polishing cloth, dry or slightly dampened your certifi ed Steinway Lyngdorf dealer instead. with de-mineralised water to polish the surfaces instead. This especially applies to products with a high gloss lacquer fi nish.
Page 8
COMPLIANCE Waste Electrical and Electronic Equipment (WEEE) This device complies with part 15 and 68 of the FCC rules. The European Parliament and the Council of the European Union Operation is subject to the following two conditions: (1) this have issued the Waste Electrical and Electronic Equipment device may not cause harmful interference, and (2) this device Directive.
Need help?
Do you have a question about the CDP-1 and is the answer not in the manual?
Questions and answers