Advertisement
Before beginning installation, carefully read these instructions. This will simplify the
installation and ensure the washer is installed correctly and safely. Leave these instructions
near the washer after installation for future reference.
NOTE: The electrical service to the washer must conform with local codes and ordinances
and the latest edition of the National Electrical Code, ANSI/NFPA 70 or in Canada, CSA
C22.1 Canadian Electrical Code Part 1.
For your safety the information in
this manual must be followed to minimize the
risk of fire or explosion or to prevent property
damage, personal injury or loss of life.
- Do not store or use gasoline or other
flammable vapors and liquid in the vicinity of
this or any other appliance.
- WHAT TO DO IF YOU SMELL GAS
· Do not try to light any appliance.
· Do not touch any electrical switch; do not
use any phone in your building.
· Clear the room, building or area of all
occupants.
· Immediately call your gas supplier from a
neighbor's phone. Follow the gas suppliers
instructions.
· If you cannot reach your gas supplier, call
the fire department.
Installation and service must be performed by
a qualified installer, service agency or the gas
supplier.
Printed in U.S.A.
Installation
Instructions
Full Size Tumble Action Washers
SUBJECT
Contents
PAGE
P/N 131997600 (0010)
2
2
2
2
2
3
4
4
5
5
Advertisement
Related Manuals for Frigidaire GLTF1040AS
Summary of Contents for Frigidaire GLTF1040AS
-
Page 1: Table Of Contents
Leave these instructions near the washer after installation for future reference. NOTE: The electrical service to the washer must conform with local codes and ordinances and the latest edition of the National Electrical Code, ANSI/NFPA 70 or in Canada, CSA C22.1 Canadian Electrical Code Part 1. -
Page 2: Pre-Installation Requirements
Check with a licensed electrician if you are in doubt as to whether the appliance is properly grounded. 1. The washer MUST be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electrical shock by a path of least resistance for electrical current. -
Page 3: Rough-In Dimensions
ROUGH-IN DIMENSIONS UNDER COUNTER INSTALLATION If an under counter* installation is desired, the washer MUST have a top sheet kit installed, P/N 131445600. Kit is available from an authorized parts distributor. *Custom sized countertop is required. -
Page 4: Location Of Your Washer
UNPACKING 1. Cut the shipping carton along the dotted line along the base of the unit. 2. While in the carton carefully lay the washer on its back side. 3. Remove the styrofoam base. 4. Carefully return the washer to an upright position and remove the carton. -
Page 5: Installation
REPLACEMENT PARTS If replacements parts are needed for your washer, contact the source where you purchased your washer or call 1-800-944-9044 for the Frigidaire Company Authorized Parts Distributor nearest you. Destroy the carton and plastic bags after the washer is unpacked. Children might use them for play. - Page 6 [DO NOT PRINT P/N 131997600 — English Page 6 left intentionally blank.]...