Digital insulation digital insulation tester (7 pages)
Summary of Contents for Zico ZI-2081
Page 1
ZI-2081 Manual Instruction Tone Generator and Amplifier Probe Introduction Congratulations on your purchase of Model LA-1013. This tone generator and amplifier probe set is used to quickly trace and identify cables or wires within a group and also check the operation of phone lines. It has an important feature that the tone generator has the function of 220V high voltage protection .With proper...
Page 2
Meter Description 1. Power switch 2. Modular connectors 3. Test leads 4. Battery compartment (rear) 5. Probe tip 6. Volume/Sensitivity control 7. Power button 8. Battery compartment (rear) 9. Headphone jack...
Page 3
Operating Instructions Cable/Wire tracing 1. Connect the tone generator to the cable a) For cables terminated at one end, connect the red alligator clip to a wire and the black alligator clip to equipment ground For unterminated cables, connect the red alligator clip to one wire and the black alligator clip to another wire.
Page 4
1. Switch the tone generator to the OFF position 2. Connect the RJ-11 connector mating cable connector. 3. The LED color indicates the condition of the telephone jack wiring. GREEN = Jack wired properly, RED = Jack wired with reversed polarity. Identifying telephone cable Line Condition 1.