Zico ZI-9100 Instruction Manual

DIGITAL INSULATION TESTER
INSTRUCTION MANUAL
ZICO
1
ZI-9100
SAFETY INFORMATION

Read the following safety information carefully before
attempting to operate or service the meter.

To avoid damages to the instrument do not apply the
signals which exceed the maximum limits shown in the
technical specifications tables.

Do not use the meter or test leads if they look damaged.
Use extreme caution when working around bare
conductors or bus bars.

Accidental contact with the conductor could result in
electric shock.

Use the meter only as specified in this manual;
otherwise, the protection provided by the meter may be
impaired.

Read the operating instructions before use and follow
all safety Information.

Caution when working with voltages above 60V DC or
30V AC RMS. Such voltages pose a shock hazard.

Before taking resistance measurements or testing
acoustic continuity, disconnect circuit from main power
supply and all loads from the circuit.
2