Docking an iPod
Step 1:
Locate the numbered bracket that fits the iPod that will be docked.
•
Each included Bracket has a number on it, indicating which iPod
model that bracket is compatible with. See the separate bracket chart
page to identify which bracket is needed.
Step 2:
Snap the bracket into place over the
Step 3:
Connect the iPod to the
•
When the unit is plugged in, using AC power, the docked iPod will
charge. If the unit is running on batteries, DC power, the docked iPod
will not charge.
Playing an iPod
Step 1:
Press the
Step 2:
Press the
Step 3:
Press the
Setting the Clock
Step 1:
Press and hold the
Step 2:
While holding the
adjust the hour and minute.
Step 3:
Release the
8
iPod Connector inside the dock.
Power Button to turn the unit on.
Source Button to switch to iPod mode.
Play/Pause Button to play or pause the docked iPod.
Time Set Button.
Time Set Button, press the Skip/Search Buttons to
Time Set Button to set the adjusted time.
iPod Connector in the dock.