Restoring The Device To Its Factory Settings; Updating Your Device; Adjusting Or Replacing The Strap - Huawei WATCH FIT Series Manual

If you change the language and region or change the time on your phone, the changes will
automatically sync to the device as long as it is connected to your phone via Bluetooth.

Restoring the device to its factory settings

Once you have restored your device to its factory settings, all its data will be cleared, so
please proceed with caution.
Method 1:
Go to Settings > System > Reset.
Method 2:
Open the Health app, touch Devices and your device name, then select Restore factory
settings.

Updating your device

Open the Health app, touch Devices and your device name, then touch Firmware update.
Your phone will check for any available updates. Follow the onscreen instructions to update
your device.

Adjusting or replacing the strap

Strap adjustment: The straps are designed with U-shaped buckles. Adjust the strap based on
your wrist size.
Strap replacement:
Strap 1: Carefully remove the fastener from the back of the strap to take off the strap.
Perform the steps in reverse to attach a strap to the device's body. Make sure that the
device's body fits tightly in the strap before removing the fastener.
Removal method 1: Remove the fastener from the back of the strap and pull down the strap
to separate it from the device's body.
Removal method 2: Remove the fastener from the back of the strap and push the strap from
the back of the device to the screen to separate the strap from the device's body.
More
19