Download Print this page

NORSK KLEBER Marcello Installation And Operating Manual page 5

Wood-burning soapstone stove

Advertisement

NORSK KLEBER REQUIRES ALL INSTALLATION AND ASSEMBLY OF THIS STOVE TO
BE PERFORMED BY TRAINED PROFESSIONALS.
CAUTION:
Follow these installation instructions in all cases.
When installing, operating and maintaining your
Babina+ model, follow the guidelines presented
in these instructions, and make them available to
anyone using or servicing the stove. In the U.S.,
guidelines established by UL 1777, the National Fire
Protection Association's Code, NFPA 211, Standards
for Chimneys, Stoves, Vents and Solid Fuel Burning
Appliances, or similar regulations, may apply to the
installation of a solid fuel burning appliance in your
area. For further information on using your heater
safely, obtain a copy of the NFPA publication "Using
Coal and Wood Stoves Safely, " NFPA No. HS-8-1974,
available from NFPA 470 Atlantic Ave. Boston, MA
02210.
In Canada, the guidelines are established by
ULC-S635, and the CSA Standard, CAN/CSA-
B365-M93, Installation Code for Solid-Fuel-Burning
Appliances and Equipment.
Always consult your local building inspector or
authority having jurisdiction, to determine what
regulations apply and what permits may be required
before installation of a solid fuel-burning appliance.
Notify your insurance company before installing this
stove.
Chimney Requirements
There are two types of approved chimneys:
1. A code-approved masonry chimney with a ceramic
tile or Listed steel flue liner.
2. A prefabricated chimney complying with the
requirements for Type HT (2100°F) chimneys per
UL 103 HT or ULC S629 HT.
INSTALLATION
Chimney Flue Sizing
• The chimney size should not be less than the cross-
sectional area of the flue collar, and not more than
three times greater than the cross-sectional area of
the flue collar.
• If the chimney flue is outdoors, its cross-sectional
area may not exceed two times greater than the
stove flue collar.
• A chimney flue having no walls exposed to the
outside below the roof-line may be no larger than
three-times the cross-sectional area of the stove
flue collar.
7

Advertisement

loading
Need help?

Need help?

Do you have a question about the Marcello and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Marcello 140Marcello 120Marcello 110