Table of Contents
Advertisement
p. 29
R
Charging the battery
Charging the battery with a USB data cable
1) Open the external connection port cover and connect the multi adapter.
2) Connect the USB cable to the external connection port.
· To charge your phone by using the USB data cable, you should have the SKT integrated USB driver installed in your PC.
· If you connect your phone to your PC by using the USB data cable, both charging and communication function is available. You can
charge your phone and transfer data from it.
3) Connect the USB data cable to the USB port on your PC.
Note
·Only use the multi adapter in the package. Other multi adapters may not be compatible.
· You can only charge the fully exhausted battery by travel/car charger only.
· Charging and communication is possible using the micro USB data cable (inbox item). However the other data cables (ex. 24, 20 pin) are
not compatible with the mobile phone.
· If you use travel charger, check the charging status by checking the lamp. (It turns red to green.)
Advertisement
Table of Contents
