Canon EF24-105MM F/4L IS USM Instruction
Ef lens
Hide thumbs
Also See for EF24-105MM F/4L IS USM:
- Instructions manual (22 pages) ,
- Instruction (14 pages) ,
- Instructions manual (26 pages)
Advertisement
Advertisement
Table of Contents
Related Manuals for Canon EF24-105MM F/4L IS USM
Summary of Contents for Canon EF24-105MM F/4L IS USM
- Page 1 EF24-105mm f/4L IS USM Instruction...
- Page 2 Thank you for purchasing a Canon product. The Canon EF24-105mm f/4L IS USM lens is a high-performance standard zoom lens developed for EOS cameras. It is equipped with an Image Stabilizer, and covers a wide range of focal lengths from wide angle to mid-telephoto.
-
Page 3: Safety Precautions
a Safety Precautions a Safety Precautions • Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous. •... -
Page 4: Table Of Contents
Nomenclature Focus mode switch (→ 5) Hood mount (→ 9) Filter mounting thread (→ 10) Focusing ring (→ 5) Image stabilizer switch (→ 6) For detailed information, reference page numbers are provided in parentheses (→ **). Distance scale (→ 8) Infrared index (→... -
Page 5: Contacts
The lens mount has a rubber ring for enhanced water- and dust-resistance. The rubber ring may cause slight abrasions around the camera's lens mount, but this will not cause any problems. If the rubber ring becomes worn, it is replaceable by a Canon Service Center at cost. ENG-4... -
Page 6: Focus Mode Switch
2. Setting the Focus Mode To shoot in autofocus (AF) mode, set the focus mode switch to AF. To use only manual focusing (MF), set the focus mode switch to MF, and focus by turning the focusing ring. The focusing ring always works, regardless of the focus mode. - Page 7 4. Image Stabilizer You can use the image stabilizer in AF or MF mode. Set the STABILIZER switch to ¡If you are not going to use the image stabilizer function, set the switch to When you press the shutter button halfway, the Image Stabilizer will start operating.
- Page 8 Image Stabilizer ¡The Image Stabilizer cannot compensate for a blurred shot caused by a subject that moved. ¡Set the STABILIZER switch to you are taking pictures using the Bulb setting (long exposures). If the STABILIZER switch is set to image stabilizer function may introduce errors.
-
Page 9: Distance Scale
5. Infinity Compensation Mark Infinity compensation mark Distance index To compensate for shifting of the infinity focus point that results from changes in temperature. The infinity position at normal temperature is the point at which the vertical line of the L mark is aligned with the distance indicator on the distance scale. - Page 10 7. Hood The EW-83H hood can keep unwanted light out of the lens, and also protects the lens from rain, snow, and dust. To attach the hood, align the hood’s attachment position mark with the red dot on the front of the lens, then turn the hood as shown by the arrow until the lens' red dot is aligned with the hood's stop position mark.
-
Page 11: Filter Mounting Thread
You can attach filters to the filter mounting thread on the front of the lens. ¡Only one filter may be attached. ¡If you need a polarizing filter, use the Canon Circular Polarizing Filter (77mm). ¡To adjust the polarizing filter, first remove the lens hood. - Page 12 10. Close-up Lenses (Sold separately) Attaching a 500D (77mm) Close-up Lens enables close-up photography. Magnification will be 0.34× – 0.05×. ¡Close-up Lens 250D cannot be attached because there is no size that fits the lens. ¡Manual focusing is recommended for accurate focusing.
-
Page 13: Specifications
¡The EF1.4X II/EF2X II extenders cannot be used with this lens. ¡Aperture settings are specified on the camera. ¡All data listed is measured according to Canon standards. ¡Product specifications and appearance are subject to change without notice. 24-105 mm f/4... - Page 14 CT1-7561-008 © CANON INC. 2005 2009.7...