Proximity Switch; Pressure Sensor; Water Proof - Sony Xperia Z1 Test Instructions

Tests: Service Tests

2.2.22 Proximity switch

The previous Chapter 2.2.4 'Speaker' test should have
been successfully carried out before doing this test!
Make sure the phone is not in 'silent mode' before
performing this test.
When entering into the test, the screen shows 'Proximity
switch OFF' and a tone is emitted.
When covering the proximity switch area (on the left side of
the Ear Speaker), the screen will show 'Proximity switch ON'
with a different type of tone.
Press the Back key to return to the Service Test Menu.

2.2.23 Pressure Sensor

N/A.
This test is not available for this product!

2.2.24 Water Proof

N/A.
This test is not available for this product!
1277-9815 Rev 3

Sony Mobile Communications AB – Company Internal
Test Instructions (mech)
18(32)