Adjusting The Osd Settings; Adjusting The Picture Quality - Acer CB342CK User Manual

Hide thumbs Also See for CB342CK:
Table of Contents

Advertisement

Adjusting the OSD settings

Note: The following content is for general reference only. Actual product specifications may
vary.
The OSD can be used for adjusting the settings of your LCD Monitor. Press the
open the OSD. You can use the OSD to adjust the picture quality, OSD setting and general
settings. For advanced settings, please refer to following page:

Adjusting the picture quality

1. Press the
key to bring up the OSD.
2. Using the / keys, select
picture element you wish to adjust.
3. Use the / keys to adjust the sliding scales.
4. The Picture menu can be used to adjust the current Brightness, Contrast, Black Boost,
BlueLight, ACM, HDR, Super Sharpness qualities.
5. Brightness: Adjust the brightness from 0 to 100.
---------------------------------------------------------------------------------------------------------------
Note: Adjusts the balance between light and dark shades.
6. Contrast: Adjust the contrast from 0 to 100.
---------------------------------------------------------------------------------------------------------------
Note: Sets the degree of difference between light and dark areas.
7. Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the
brightness without changing lighter shades.
8. Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light
is shown -- 80%, 70%, 60%, or 50%.
---------------------------------------------------------------------------------------------------------------
Note: A higher value allows more blue light to pass through, so in order to
achieve the best protection, please select a lower value, of which 50% is in the
best state and has been tested by TÜV Rheinland and meet the requirements of
TÜV Rheinland's "Low Blue Light Content" standard.
Mode - Standard
Picture
Brightness
Color
Contrast
Audio
Black Boost
Performance
Blue Light
OSD
ACM
System
HDR
Super Sharpness
Information
Picture from the OSD menu. Then navigate to the
12
80
50
5
Off
Off
Off
Off
key to

Advertisement

Table of Contents
loading

Table of Contents