Table of Contents
Advertisement
7. The right middle log (18" D-067, 24" & 30"
D-041) has a groove on the bottom to sit on
the chassis and has to sit on the tab on the
back of the right front. The right middle log
should have a recess area that fits around
the ramp log as shown in Figure 43.
Right Middle
Log
f i r e - p a r t s . c o m
Figure 43 - Installing Right Middle Log
8. The rear middle log (18" D-068, 24" &
30" D-042) should fit between the ramp
log and the rear burner. The left and right
middle logs have recessed areas for the
rear middle log to sit into (See Figure 44).
There may be a small gap between the rear
middle log and the ramp log, this is normal..
Be careful not to push the rear burner out
of position while installing this log.
Rear
Middle Log
Figure 44 - Installing Rear Middle Log
24
INSTALLATION
Continued
9. Rest the rear log (18" D-069, 24" & 30"
D-043) on the chassis behind the rear
burner as shown in Figure 45. The bottom
of the rear log will sit into the rear log sup-
ports.
Rear Log
10. Place the left top log (D-046) onto the rear
log and the left middle log. Make sure to
place the projection on the bottom of the
left top log into the recessed areas on the
rear and left middle logs (see Figure 46).
Left
Middle
Log
www.fmiproducts.com
Figure 45 - Installing Rear Log
Figure 46 - Installing Left Top Log
Left Top Log
Rear Log
125527-01E
Advertisement
Table of Contents
