Summary of Contents for Dermalog FLC1 Light Edition
Page 1
User Guide DERMALOG FLC1 Light Edition Version 1.0 July 20, 2020...
Page 2
This page is intentionally left blank. DERMALOG FLC1 Light Edition User Guide...
Page 3
The data contained in the examples are fictitious, unless otherwise noted. DERMALOG Identification Systems GmbH is not liable for any direct or indirect damages because of or in connection with the use of the documentation as far as there is no deliberate or grossly negligent conduct.
EVISION HISTORY Revision history Document Version Date Author Changes 2020-07-20 DERMALOG Initial document Table 1: Revision history DERMALOG FLC1 Light Edition User Guide...
General views ................................14 6.1.2 Dimensions ................................. 15 Available software products ......................15 Installation ........................16 Position the DERMALOG FLC1 Light Edition ................16 Connect the hardware .......................17 Install the software package ......................18 Calibrate the DERMALOG FLC1 Light Edition ................18 Terms of Warranty ......................19 Ordering information .......................
NTRODUCTION Introduction The DERMALOG FLC1 Light Edition captures facial images and detects the body temperature of a person. This user guide describes the DERMALOG FLC1 Light Edition. It gives information on safety instructions, technical data, product description, installation, maintenance and disposal.
UDIENCE 1 Audience This document is provided for users of the DERMALOG FLC1 Light Edition. Any person working with the DERMALOG FLC1 Light Edition must have previously read this document. 2 Document conventions TERMS AND DEFINITIONS Term Definition capture The method of taking a biometric sample from an end user.
DERMALOG FLC1 Light Edition. Keep these instructions always readily available at the DERMALOG FLC1 Light Edition. Also pay attention to any warning messages shown by DERMALOG software, to any signs or labels on the DERMALOG FLC1 Light Edition and to any further DERMALOG instructions shipped with the DERMALOG FLC1 Light Edition.
(for example, if placed near loudspeakers, televisions or radios) Installation Do not use a USB cable longer than 2 m. If you want to connect the DERMALOG FLC1 Light Edition via a USB hub, always use a self-powered (active) hub.
Do not try to update camera firmware that is not officially released for the specific camera module SKU and revision. If the DERMALOG FLC1 Light Edition makes strange noises, or gives off smoke, heat or strange odors, or other abnormalities occur when in use, immediately disconnect it from the computer. Then contact DERMALOG.
DERMALOG. Disregarding this warning can result in serious damage to the DERMALOG FLC1 Light Edition and will cause the loss of any warranty. If you need to return the DERMALOG FLC1 Light Edition for repair, use a suitable packing material to avoid further damage (preferrably the original packing material).
4 Delivery package content The delivery package contains: DERMALOG FLC1 Light Edition USB 3.0 cable (USB-C to USB-A, 1 m length) Unless otherwise expressly agreed, download the purchased software from the DERMALOG Support Center (https://support.dermalog.com). DERMALOG FLC1 Light Edition User Guide...
Table 6: Technical data of DERMALOG FLC1 Light Edition The software and hardware requirements for operating the DERMALOG FLC1 Light Edition are listed in Table 7. Requirements Processor Intel® i5/ 8th generation (similar or equal)
RODUCT DESCRIPTION 6 Product description The DERMALOG FLC1 Light Edition is intended to capture facial images and to detect the body temperature of a person. Hardware 6.1.1 General views Figure 2, Figure 3 and Figure 4 show different views of the DERMALOG FLC1 Light Edition.
Figure 5: Dimensions of the DERMALOG FLC1 Light Edition Available software products The DERMALOG FLC1 Light Edition is operated with the DERMALOG Fever Detection Application. For detailed information on the DERMALOG Fever Detection Application, see the separate document DERMALOG Fever Detection Application User Guide.
Place the DERMALOG FLC1 Light Edition on a suitable mount, e.g. a tripod. Observe the recommended temperature range for the DERMALOG FLC1 Light Edition to operate (see chapter 5). To achieve the best possible results, it is recommended to operate the DERMALOG FLC1 Light Edition under the following conditions: 20 °C to 24 °C (68°...
The DERMALOG FLC1 Light Edition is positioned at the person’s eye level. The distance between the person and the DERMALOG FLC1 Light Edition is between 0.5 m and 2 m. Figure 6: Recommended alignment of DERMALOG FLC1 Light Edition...
USB 3 port on the computer is labelled with SS (for SuperSpeed) and is marked with blue color inside the USB 3 port. No additional drivers need to be installed to operate the DERMALOG FLC1 Light Edition. The standard Windows camera drivers are used.
1.3. In case of a defect, DERMALOG, at its sole discretion, shall have the right to remedy the defect or to supply alternative hardware free from the defect. In case of defects of software, the remedy by DERMALOG can be achieved for example, by the provision of an update, by the exchange of the software in whole, or by written and/or oral directives, which avoid the effects of the defect.
RDERING INFORMATION 9 Ordering information For ordering information, please contact DERMALOG via sales@dermalog.com. DERMALOG FLC1 Light Edition User Guide...
Need help?
Do you have a question about the FLC1 Light Edition and is the answer not in the manual?
Questions and answers