Basic Steps For Accessing And; Using Services; Setting Up The Phone For A Service; Making A Connection To A Service - Nokia 3220 Manual

9232486_3220_2_en.fm Page 56 Thursday, January 20, 2005 1:31 PM
M e n u f u n c t i o n s
to view all the details of the Internet
pages.
Important: Use only
services that you trust and
that offer adequate security
and protection against
harmful software.

Basic steps for accessing and

using services

1. Save the service settings that are
required to access the service
that you want to use. See page
56.
2. Make a connection to the given
service. See page 56.
3. Start browsing the pages of the
service. See page 57.
4. Once you are finished browsing,
end the connection to the
service. See page 57.
Setting up the phone for a
service
Your phone may have stored some
service settings. Additional settings
may be received as a configuration
message from the service provider
that offers the service that you want
to use. To receive the service settings
as a configuration message, see
Configuration settings service on
page viii and Configuration settings
on page 43.
56
For more information and for the
appropriate settings, contact your
service provider.
Making a connection to a
service
Make sure that the service settings
of the service you want to use are
activated. To activate the settings,
press Menu, and select Services,
Settings and Configuration
settings. Select Configuration
select the configuration set you
want to activate.
Make a connection to the service.
There are several ways to connect:
• Open the start page, for example,
the homepage of the service
provider: press Menu, and select
Services and Home, or in standby
mode press and hold
• Select a bookmark of the service:
press Menu, and select Services,
Bookmarks, and select a
bookmark. If the bookmark does
not work with the current active
service settings, activate another
set of service settings and try
again.
• Select the last URL: press Menu,
and select Services, Last web
addr..
• Key in the address of the service:
press Menu, and select Services
and then Go to address. Key in
and
.