Dyna-Glo DGN486DNC-D Manual page 13

ASSEMBLY INSTRUCTIONS
22. Attach one M6x30 bolt (JJ) on each side of lid
and firebox assembly (B). DO NOT fully tighten.
Hardware Used
M6x30 Bolt
JJ
23. Insert one end of warming rack (U) onto M6x30
bolt (JJ) and into the hole on lid and firebox
assembly (B). Repeat for other side.
24. Fully tighten M6x30 bolts (JJ) on each side of lid
and firebox assembly (B).
x 8
13