Advertisement
Read This Before Operating
DO NOT RETURN THE STARTING PITCHER MACHINE TO THE RETAIL STORE WHERE
WARNING: ONLY USE SLIDER SOFT LITE-BALLS IN THE STARTING PITCHER MACHINE
The Starting Pitcher Lite-Ball Pitching Machine only uses Slider Soft Lite-Balls. If you put real baseballs the
Starting Pitcher Lite-Ball Machine you will damage the machine and void the Starting Pitcher warranty. Trend
Sports recommends only using official Slider Soft Lite-Balls in your Starting Pitcher Lite-Ball Pitching Machine.
These balls are incredibly accurate, long lasting, and produce the best performance in the machine.
TREND SPORTS is dedicated to your customer satisfaction. If you experience any trouble with the operation
of the Starting Pitcher Pitching Machine contact us at: (800) 492-9334 or log on to our website at http://www.
TrendSports.com.
WARNING: THIS PRODUCT IS TO BE USED BY ADULTS ONLY. MAKE SURE MACHINE IS TURNED OFF BEFORE
ASSEMBLY! KEEP HANDS AND ALL BODY PARTS AWAY FROM BALL ENTRY AND EXIT! SERIOUS HAND, EYE, AND
BODILY INJURY MAY OCCUR IF USED INCORRECTLY!
•
Please be sure to read all of the instructions before using the Starting Pitcher Lite-Ball
Pitching Machine to insure the machine is working properly.
•
Parents: Your child should be made aware of the potential dangers of using the
Starting Pitcher Lite-Ball Pitching Machine.
•
Never put your fingers into the Starting Pitcher Lite-Ball Pitching Machine.
•
The Starting Pitcher is not a toy and an adult should supervise children. It is very important
the batter makes sure the area is clear before swinging a bat.
•
Stay clear of the ball opening while the Starting Pitcher is operating. Although the balls are
very light, they may cause eye damage or other injury may occur.
Children must be advised of this danger and appropriate precautions should be taken.
DO NOT use any type of ball other than Slider Soft Lite-Balls in this machine.
•
•
Always use a NOCSE approved batting helmet when batting.
•
DO NOT LOOK INTO THE FRONT OF THE MACHINE WHILE THE STARTING PITCHER IS RUNNING.
Occasionally a ball may get stuck in the machine. The ball may pause and then shoot out and cause
eye injury. If the ball gets stuck, turn off the machine immediately. You should be able to remove the
ball easily by tilting the Starting Pitcher backwards to eject the ball.
•
Never operate in water or moisture.
•
Always store in a dry area.
IMPORTANT
PURCHASED. CALL TOLL FREE: (800) 492-9334.
CUSTOMER SERVICE
Advertisement
Table of Contents
Related Manuals for Trend Sports Starting Pitcher SP99
Summary of Contents for Trend Sports Starting Pitcher SP99
- Page 1 These balls are incredibly accurate, long lasting, and produce the best performance in the machine. CUSTOMER SERVICE TREND SPORTS is dedicated to your customer satisfaction. If you experience any trouble with the operation of the Starting Pitcher Pitching Machine contact us at: (800) 492-9334 or log on to our website at http://www.
- Page 2 STARTING PITCHER PARTS LIST Top Spiral (Qty 1) Leg Assembly (Qty 3) Housing (Qty 1) Spiral Ball Feeder (Qty 1) Nut (Qty 3) Bolt (Qty 3) Slider Soft Metal Teeth Carriage Lite-Ball Tri-Pod Knob Washer Bolt Washer (Qty 1) Base (Qty 1) (Qty 1) (Qty 1) (Qty 1)
- Page 3 STARTING PITCHER ASSEMBLY (Continued) STEP 7: Slide Housing (K) onto Tri-Pod Base (F) and align mounting hole of Housing (K) and mounting hole of Tri-Pod Base (F). Mounting Housing (K) should Hole be assembled in back STEP 8: Slide Carriage Bolt (J) of Tri-Pod Base (F).
- Page 4 Fast Ball/Curve Ball Instructions WARNING! ROTATING THE HEAD OF THE STARTING PITCHER FROM FAST BALL TO CURVE BALL POSITIONS CHANGES THE DIRECTION AND TRAJECTORY OF THE PITCHED BALL. MAKE SURE NO PERSONS ARE IN FRONT OF MACHINE WHILE ADJUSTING FOR FAST BALL OR CURVE BALL PITCHES. CAUTION: When machine is rotated for different pitch types, the ball direction changes dramatically.
Need help?
Do you have a question about the Starting Pitcher SP99 and is the answer not in the manual?
Questions and answers