Advertisement
Quick Links
Read This Before Operating
DO NOT RETURN THE BALLFIELD TO THE RETAIL STORE WHERE PURCHASED.
TREND SPORTS is dedicated to your customer satisfaction. If you experience any trouble with the BallField contact us at:
Trend Sports recommends using Slider Lite-Balls for younger players when using the pitching and fielding rebounder on the BallField.
WARNING: THIS PRODUCT IS TO BE USED BY ADULTS ONLY. MAKE SURE THE AREA IS CLEAR BEFORE SWINGING A BAT. ONLY ADULTS SHOULD
MAKE REBOUNDER ADJUSTMENTS. KEEP HAND AND FINGERS CLEAR OF FOLDING JOINTS TO AVOID INJURY. MAKE SURE TETHERED BALLS ARE
•
Please be sure to read all of the instructions before using the BallField .
•
Parents: Your child should be made aware of the potential dangers when using the BallField Pitching,
Hitting, and Fielding system.
•
The BallField is not a toy and an adult should supervise children.
•
It is very important that the batter make sure the area is clear before swinging a bat.
•
DO NOT use any type of ball other than the BallField balls provided, other balls could break loose
and cause injury.
•
When adjusting or folding the BallField always use two people to avoid damage or injury.
95 West 650 South • St. George, Utah 84770 • PH: 800-492-9334 • PH: 435-656-1756 • Fax: 435-688-0741 • www.TrendSports.com
IMPORTANT
CALL TOLL FREE: (800) 492-9334.
CUSTOMER SERVICE
(800) 492-9334 or go to our website at www.TrendSports.com.
BALLFIELD RECOMMENDATIONS
SECURELY FASTENED BEFORE HITTING.
WARNING!
Make sure the area is clear before
swinging a bat. Serious injury could
occur. Use under adult supervision only.
Advertisement
Related Manuals for Trend Sports BallField BF199
Summary of Contents for Trend Sports BallField BF199
- Page 1 DO NOT RETURN THE BALLFIELD TO THE RETAIL STORE WHERE PURCHASED. CALL TOLL FREE: (800) 492-9334. CUSTOMER SERVICE TREND SPORTS is dedicated to your customer satisfaction. If you experience any trouble with the BallField contact us at: (800) 492-9334 or go to our website at www.TrendSports.com. BALLFIELD RECOMMENDATIONS Trend Sports recommends using Slider Lite-Balls for younger players when using the pitching and fielding rebounder on the BallField.
- Page 2 BALLFIELD PARTS LIST Nuts, Bolts & Washers (Qty - 2) (Qty - 2) (Qty - 6) (Qty - 2) (Qty - 2) (Qty - 2) (Qty - 12) (Qty - 2) (Qty - 12) (Qty - 2) (Qty - 34) (Qty - 4) (Qty - 2) (Qty - 6)
- Page 3 BALLFIELD FRAME ASSEMBLY INSTRUCTIONS STEP 1: Locate parts A, B, C, D, both G parts, and two H parts. Lay them flat on the ground and assemble as illustrated. Connect the parts by sliding the tapered ends into the larger ends and lock in place with the push-pins.
- Page 4 BALLFIELD FRAME ASSEMBLY INSTRUCTIONS (Continued) STEP 2: Locate parts F and P. Following illustration "V-Frame Assembly Bottom View" to the right, insert part F into the pivot slot on part A, align the holes and fasten together with the required nut, bolt, and washers.
- Page 5 BALLFIELD FRAME ASSEMBLY INSTRUCTIONS (Continued) STEP 4: Following illustration "Top View" to the right, insert part I into the pivot slot on part C, align the holes and fasten together with the required nut, bolt, and washers. Attach part P (brace) to part I and part C as shown in the "Side View"...
- Page 6 BALLFIELD REBOUNDER ASSEMBLY INSTRUCTIONS STEP 6: With the BallField frame still face down, assemble the "rebounder" frame. Locate parts L, M, N, and O. Position the parts inside the BallField frame as shown to the right. (Note: Make sure that parts O are on the same side as parts C and D.
- Page 7 BALLFIELD REBOUNDER ASSEMBLY INSTRUCTIONS (Continued) STEP 9 STEP 8: Next align part Q with the hole on part Now take the entire BallField and A of the BallField frame. Insert bolt U Rebounder frames and stand it upright, as shown to the right. through the outside of the BallField frame, slide washer Y, then thread nut VV, fol- lowed by washer YY.
- Page 8 BALLFIELD NET ASSEMBLY INSTRUCTIONS STEP 10: With the BallField upright, begin by hanging the corners T-1 & T-2 of the net from the two top cor- ners of the "ball side" of the frame using supplied bungees part R. Wrap the bungee through the top most net square and around the frame.
- Page 9 BALLFIELD REBOUNDER NET ASSEMBLY INSTRUCTIONS STEP 11: Start attaching the "red target area" of the netting to the rebounder frame. Begin in each of the corners by wrapping the attached bungees around the frame twice. REBOUNDER ANGLE ADJUSTMENT: You can adjust the angle of the rebounder for grounders, fly balls, After attaching the four corners, attach the middle or line-drives by loosening the wing nuts on both sides of the bungee on each side.
- Page 10 BALLFIELD BALL ATTACHMENT INSTRUCTIONS STEP 12: Fasten the ball and cord to part J and K of the frame with the attached "Eye-Bolt" as shown here. Adjust the ball height by moving the attached hook to the desired hole in the frame. BALLFIELD BALL CHANGE INSTRUCTIONS CHANGE BASEBALL TO SOFTBALL: A - Push ball rope through the loop in the adjustable...
- Page 11 BALLFIELD FRAME FOLDING INSTRUCTIONS WARNING WHEN FOLDING THE BALLFIELD FRAME FOR STORAGE BE CAREFUL NOT TO ALLOW THE TOP OR BOTTOM FRAME TO FALL AFTER THE BOLTS HAVE BEEN REMOVED. SERIOUS INJURY MAY OCCURE. KEEP FINGERS AND HANDS CLEAR OF JOINTS AS THE FRAME FOLDS! LAY FRAME ON REBOUNDER SIDE: When folding the BallField for storage place the frame on the ground with the rebounder face down.
Need help?
Do you have a question about the BallField BF199 and is the answer not in the manual?
Questions and answers