Advertisement
Monkey
TO ATTACH YOUR
MOMETER PRO:
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Loosen the large nut at
Feed the cords through
Tighten the nut as much as
the bottom of the
the hole at the top of
you can by hand. If you like,
Monkey MOMETER PRO
your stand one at a time
you can tighten further with
and remove it.
until all are through.
a large adjustable wrench.
Feed the power cable
through the bottom mail slot on
one of the back plates.
Then feed the cable up
though hole between the posts
and connect it to the
Monkey MOMETER PRO'S
Feed the chords through
Affix the two back plates
using your remaining bolts.
the spacer ring and large nut.
power cable.
monkeyvision.com.au
Advertisement
