Advertisement
TO BUILD YOUR STAND:
THE STAND HAS THREE MAIN PARTS: A BASEPLATE AND TWO UPRIGHT POSTS.
(YOU SHOULD ALSO HAVE A POWER CABLE, TWO BACK PLATES, A LARGE SPACER RING AND 20 BOLTS)
STEP 1
STEP 2
STEP 3
The upright posts have four holes
Attach the baseplate to one of the
Carefully place the other post
in each end. One of those ends
posts using four of the supplied bolts.
on top and attach the bolts.
has hexagonal nuts on the inside.
Screw them in by hand then tighten
That's the bottom.
with a 10mm spanner or drill.
monkeyvision.com.au
Advertisement
