Table of Contents
Advertisement
(1) Use Photoshop to open the photo;
(2) Choose "File" then "save as" from the menu, as the picture on the left hand side shows,
select the picture format as JPEG, input the file name and click the "save" icon;
(3) After click on the "save" icon, a new window will appear as the picture on the right hand
side shows, select "Baseline (standard)" or "Baseline optimized";
(4) Click the "OK" icon.
Question 7. During power on, why does the TV will have a short flashing, blue screen or
screensaver?
Answer:
This is normal, when the system initializes, it will setup the corresponding parameters so it can
output the correct video signal to the TV, during the initializing time, the TV will receive
incorrect signals or the signals will not be stable and will cause the TV screen to flash, some
TV‟s will treat this as no signal, and will display a blue screen or screensaver.
Question 8. Why when I switch to Y/Pb/Pr 480P, 576P, 720P, 1080I, does the TV screen
display an unwatchable picture?
Answer:
Please check if your TV supports Y/Pb/Pr 480P, 576P, 720P, 1080I output, if your TV does not
support, please use the A/V signal display instead, press the TV SYSYEM button on the
remote control, then switch the TV‟s video input to NTSC or PAL.
Question 9. Why is there no sound on movie or music playback when using Y/Pb/Pr
component output?
Answer:
Y/Pb/Pr output is a video output only, and does not include sound signals, when using Y/Pb/Pr
output, please plug the A/V OUT or the S/PDIF jack to output sound.
Question10. Why couldn‟t the player find the hard disc?
Answer:
Make sure the firmware is installed correctly, and no system partitions on the HDD were
59 / 60
Advertisement
Table of Contents
