First Time Usage - Home Multimedia Center Movie Cube-R700 User Manual

1.5 First Time Usage

1.5.1 Firmware Installation
For users who bought the player without a HDD inside, and want to install a SATA HDD, please
see „HDD Format‟ in „6.5 Changing System Settings‟ for details.
1.5.2 Remote Control
First time usage of Remote control
Install the batteries before using the remote control, installation steps are as the picture shows:
1.5.3 Power on/off, language control
1. Power on
After connecting the power supply cord, the player will soon enter standby mode, and the red
STANDBY indicator on the front panel will turn on. Then press the STANDBY button on the
front panel or remote control to wake up the system, wait for a couple of seconds to enter the
system and the blue ON indicator on the front panel will turn on.
2. Power off
When the system is running, press the STANDBY button on the front panel or remote control,
the player will enter standby mode.
3. Language control
The system language of this player can be set to English or other languages. In the setup
interface is language setup, the selected language will take effect immediately.
13 / 60