Do you have a question about the In-Ground Fence and is the answer not in the manual?
Questions and answers
Pamela Hawkins
March 2, 2025
What is wrong when my loop light is not on?
1 comments:
Mr. Anderson
March 2, 2025
If the loop light is not on for the Premier Pet In-Ground Fence, it may indicate a break or disconnection in the boundary wire. To resolve this, check the wire for damage and ensure it is properly connected.
This answer is automatically generated
ANTHONY MARTIN
April 16, 2025
my collar keeps flashing about every 4 seconds. I have changed battery, reset collar by removing battery and running power out. It seems to be working fine just keeps flashing
1 comments:
Mr. Anderson
April 16, 2025
If the collar of a Premier Pet In-Ground Fence keeps flashing every 4 seconds, it indicates a low battery.
Summary of Contents for Premier Pet In-Ground Fence
Page 1
In-Ground Fence ™ GIG00-16919 | Product Manual Have questions about your In-Ground Fence System ™ or need training tips for your pet? Our Customer Care representatives are here to help you. Call our USA-based Customer Care Center at +1 (866) 381-2785 USA &...
TABLE OF CONTENTS Important Safety Information Components Explanation of Attention Words and Symbols used in this guide How It Works Key Definitions This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that Locate the Fence Transmitter follow this symbol to avoid possible injury or death.
• Circular saw with masonry blade • Staple gun • Non-metallic collar and leash Set up and training help: www.premierpet.com How It Works The Premier Pet ™ In-Ground Fence ™ system has been proven safe, comfortable, and effective for pets over 8 lb.
Locate the Fence Transmitter Sample Layouts Sample 1: Perimeter Loop (Single Loop) • Place the fence transmitter: The perimeter loop is the most common layout. This will allow your pet to • In a dry, well ventilated, protected area (1A, 1B). freely and safely roam your entire property (2C).
The surge protector will make any layout changes easier. Work carefully. A nick in the wire included with this system is designed to protect your In-Ground Fence system from surges or spikes that 10 ft.
Do not install the battery while the receiver collar is on your pet. • Do not install the surge protector if there is not at least 30 ft. (10 m) or more of wire between the electrical outlet and This receiver collar utilizes a replaceable Premier Pet battery (GAC11-16351).
To Attach the Boundary Wire to an Existing Fence light is no longer lit. Turn the knob clockwise and increase by 2 numbers. The light should turn ON. The boundary wire of the Premier Pet In-Ground Fence system can be ™...
To assure a proper fit, please follow these steps: Make sure that the battery is not installed in the receiver collar. Start with your pet standing comfortably. Place the receiver collar on your pet so that the Premier Pet logo is facing your pet’s chin. ™...
• Remove the collar after each training session. The receiver collar is not • Check battery to make sure it is installed properly. • Be sure to place the collar on your dog’s neck with the Premier Pet logo facing up. ™...
11. When testing is complete reconnect and verify that the boundary wire is plugged into the Loop Terminals on the surge protector and the transmitter is connected to the surge protector. TROUBLESHOOTING 12. Return the boundary width control knob setting to the position noted earlier. 13.
Terms of Use and Limitation of Liability Perchlorate Battery Terms of Use Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. This Product is offered to you conditioned upon your acceptance without modification of the terms, conditions and notices contained herein. Usage of this Product implies acceptance of all such terms, Battery Disposal conditions, and notices.
Need help?
Do you have a question about the In-Ground Fence and is the answer not in the manual?
Questions and answers
What is wrong when my loop light is not on?
If the loop light is not on for the Premier Pet In-Ground Fence, it may indicate a break or disconnection in the boundary wire. To resolve this, check the wire for damage and ensure it is properly connected.
This answer is automatically generated
my collar keeps flashing about every 4 seconds. I have changed battery, reset collar by removing battery and running power out. It seems to be working fine just keeps flashing
If the collar of a Premier Pet In-Ground Fence keeps flashing every 4 seconds, it indicates a low battery.
This answer is automatically generated