Advertisement
Quick Links
Model W1710
***IMPORTANT UPDATE***
Applies to Models Mfd. Since 1/14
and Owner's Manual Revised 9/05
Phone #: (360) 734-3482 • Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz
We made the following changes to the Model W1710 since the original manual was printed:
•
Obtained CSA certification meeting CSA C22.2 #105-1953 and UL 987-7th standards.
•
Added and changed components inside the electrical box.
•
Updated warning instructions.
•
Changed machine wiring.
•
Replaced oscillation diaphragm (P/N 485) with an air cylinder (P/N 485V2).
•
Updated air flow parts diagram and list.
Note: At the top of each page is a note that indicates which page it replaces in the original manual. New
parts are designated with a "V2".
Aside from the information contained in this update, all other content in the owner's manual is
applicable and MUST be read and understood for your own safety. IMPORTANT: Keep this update with
the owner's manual for future reference. If you have any further questions, contact our Technical
Support.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC., #16564TS, Printed in Taiwan
READ THIS FIRST
COPYRIGHT © MAY, 2014 BY WOODSTOCK INTERNATIONAL, INC.
Advertisement
Related Manuals for Woodstock SHOP FOX W1710
Summary of Contents for Woodstock SHOP FOX W1710
- Page 1 If you have any further questions, contact our Technical Support. COPYRIGHT © MAY, 2014 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC., #16564TS, Printed in Taiwan...
- Page 2 Model W1710 (Mfd. Since 1/14) Changed Electrical Cabinet Components (Changes to Page 44–45) 531V2 534V2 533V2 520V2 522V2 PART # DESCRIPTION REF PART # DESCRIPTION 520V2 X1710520V2 INCOMING POWER TERMINAL BAR 3P V2.01.14 X1710550 OL RELAY SCHN LT47 5-60A 522V2 X1710522V2 TERMINAL BAR 24P V2.01.14 X1710580 OL RELAY SCHN LR3D12 5.5-8A X1710530...
- Page 3 Replaces Page 4 Model W1710 (Mfd. Since 1/14) SAFETY SAFETY For Your Own Safety, Read Manual Before Operating Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of importance of the safety messages.
- Page 4 INTENDED USAGE. Only use machine for its keep machine in good working condition. A intended purpose—never make modifications machine that is improperly maintained could without prior approval from Woodstock malfunction, leading to serious personal injury International. Modifying machine or using or death.
- Page 5 Replaces Page 6 Model W1710 (Mfd. Since 1/14) Additional Safety for Wide Belt Sanders Serious injury or death can occur from hands getting trapped between workpiece and conveyor table, getting entangled in rotating parts inside machine, or lacerated by sanding drum. Workpieces thrown by sander can strike nearby operators.
-
Page 6: Electrical Schematic
Replaces Page 31 Model W1710 (Mfd. Since 1/14) Electrical Schematic... -
Page 7: Control Panel Wiring
Replaces Page 32 Model W1710 (Mfd. Since 1/14) Control Panel Wiring... -
Page 8: Electrical Cabinet
Replaces Page 33 Model W1710 (Mfd. Since 1/14) Electrical Cabinet... - Page 9 Model W1710 (Mfd. Since 1/14) Changes to Pages 42–43 New Upper Roller Air Cylinder Previous Version Diaphragm (P/N 485) New Version Air Cylinder (P/N 485V2) 485V2 PART # DESCRIPTION REF PART # DESCRIPTION X1710475 UNIVERSAL JOINT FORK X1710495 LOCK WASHER 5/16 485V2 X1710485V2 OSCILLATION AIR CYLINDER V2.01.14 X1710496...
- Page 10 Changes to Pages 46–47 Model W1710 (Mfd. Since 1/14) Updated Air Flow Diagram REF PART # DESCRIPTION REF PART # DESCRIPTION X1710639 FILTER CUP 1/4" X1710658 BUFFER 1/8" (BRONZE) X1710640 PRESSURE REGULATOR 1/4" X1710660 CONNECTOR 5/16N X 1/8T X 90DEG X1710641 CONNECTOR 1/4T X 5/16N X1710661...
- Page 11 Refer to the W1710 manual for the rest of the parts. COPYRIGHT © NOVEMBER, 2007 BY WOODSTOCK INTERNATIONAL, INC. REVISED DECEMBER, 2009 (BL) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
- Page 12 W1710 Manual Update (Mfg. After 11/07) W1710 Wiring Diagram (11/2007)
- Page 13 W1710 Manual Update (Mfg. After 11/07) W1710 Electrical Schematic (12/2009) O L 1 MO T O R S A N D I N G B E L T L T 4 7 T A B L E L I F T I N G MO T O R &...
Need help?
Do you have a question about the SHOP FOX W1710 and is the answer not in the manual?
Questions and answers