Advertisement
Quick Links
Advertisement
Related Manuals for iPower SC2000i
Summary of Contents for iPower SC2000i
- Page 1 0845 505 3000...
- Page 2 Model SC2000i 79cc 1600w 2000w 50Hz 230V 6.9A 230V AC(1);12V DC(1) 22KG/48.4lbs SAE 10W-30 19.7×11.4×18.3inch Product Dimension: L x W x H Packing Dimension: L x W x H 21.7×13.0×20.0inch...
- Page 5 IMPORTANT SAFETY INSTRUCTIONS...
- Page 6 IMPORTANT SAFETY INSTRUCTIONS...
- Page 7 IMPORTANT SAFETY INSTRUCTIONS...
- Page 8 IMPORTANT SAFETY INSTRUCTIONS...
- Page 9 IMPORTANT SAFETY INSTRUCTIONS...
- Page 16 product...
- Page 19 AC 240V/50Hz 1. LOW IDLE 2. Low Oil Alarm 3. Overload Alarm 4. Output Indicator 5. 8A DC Circuit Breaker 6. 12V DC Output 7. Parallel Output 8. Multi-switch 9. Ground Terminal 10.240V AC/50Hz 11.5V USB...
- Page 22 greater wattage Sockets (Please refer to 4.4 for how to connect properly) .
- Page 27 3.Turn the multi-switch to the “START” position.
- Page 29 1.Turn the multi-switch to the “OFF” position. “OFF”...
- Page 31 Performance Allows you to increase the output by connecting two generators together. By using the parallel connection wires provided. Attention: Be sure generators are powered off and without load when connecting the parallel wires. AC 240V/50Hz...
- Page 32 connected. AC 240V/50Hz ④ ③ ② ①...
- Page 33 not connected properly, 4.The load plugs can now be plugged into socket 6. AC 240V/50Hz ⑤ ③ A-IPOWERE A-IPOWERE Make sure to connect the correct parallel wire into the correct socket. Connect the parallel wires when generator is off. Parallel wires are not necessary when only one generator is being used.
-
Page 50: How To Obtain Warranty Service
IMPLICATIONS AND CONSEQUENTIAL necessary information available – Model DAMAGES Number, Serial Number, Proof of Purchase A-iPower is not obligated to cover any loss DO NOT RETURN THE PRODUCT TO of time, use of product, freight cost, or any THE PLACE OF PURCHASE... - Page 52 Abbey Access Ltd Office: 0845 505 3000 / Fax: 01639 844476 Unit 23, Ynyscedwyn Industrial EstateTrawsfforddYstradgynlais, SwanseaSA9 1DT 32082-02971-01...
Need help?
Do you have a question about the SC2000i and is the answer not in the manual?
Questions and answers
when I started the 2200 W inverter generator the engine runs high pitch, what would be the cause of it?
A high-pitch sound from the iPower SC2000i inverter generator engine when started could be caused by a problem with the carburetor. If the carburetor is dirty or malfunctioning, it can affect the air-fuel mixture, leading to abnormal engine behavior such as high-pitch running. Cleaning or servicing the carburetor may resolve the issue.
This answer is automatically generated