Advertisement
Quick Links
Advertisement
Related Manuals for iPower SUA2000iD
Summary of Contents for iPower SUA2000iD
- Page 1 10887 Commerce Way Unit A Fontana CA 92337...
- Page 2 Model SUA2000iD 1600W-GAS / 1500W-LPG 2000W-GAS / 1800W-LPG 48.4 lbs SAE 10W-30 19.7×11.4×18.3inch Product Dimension: L x W x H Packing Dimension: L x W x H 21.7×13.0×20.0inch...
- Page 3 DUE TO THE FAILURE OF FOLLOWING...
- Page 12 identified If there are any questions concerning...
- Page 13 an enclosed...
- Page 16 product...
- Page 17 SUA2000iD Torch...
- Page 19 1. MAIN 6. Parallel Operation Outlets Connect two AIPOWER inverter generators 2. LOW IDLE through a parallel connection kit for a higher Turn ON to increase fuel economy and runtime output when the load is below 75% load 7. Grounding Nut Ground generator to reduce risk of electric shock 3.
- Page 20 LOW IDLE LOW IDLE...
- Page 22 Connect the Parallel Cables first, then start the greater wattage unit first if different from the other. Sockets (Please refer to 4.4 for how to connect properly) . Fuel Selector Switch The Fuel Selector Switch controls the desired fuel source. When switch is turned left, gasoline is selected.
- Page 23 greater w attag e...
- Page 27 3.4.1 1. Turn the FUEL SOURCE switch (Fig. 7) to the “GAS” position. 2. Turn the LOW IDLE switch (Fig. 8) to “OFF”. Fig. 7 3. Turn the MAIN switch (Fig. 8) to the “ON” position. 4. While holding the fuel tank cap so that it will not move turn the air vent knob to “ON”...
- Page 28 - FOR LPG - 1. Turn the FUEL SOURCE switch (Fig. 11) to the “LPG” position. 2. Connect the LPG gas hose to the propane fuel source (Fig. 12). Fig. 11 3. Connect the small end of the LPG gas hose to the LPG regulator on the generator and then snug with a wrench to prevent leakage (Fig.
- Page 29 MAIN 1. Turn the MAIN switch (Fig. 12) to the “OFF” position. “OFF”...
- Page 31 Performance Allows you to increase the output by connecting two generators together. By using the parallel connection wires provided. SUA2000iD Attention: Be sure generators are powered off and without load when connecting the parallel wires.
- Page 32 connected. ④ ③ ② ①...
- Page 33 4.The outlets now can be used. ⑤ ③ A-IPOWER A-IPOWER Make sure to connect the correct parallel wire into the correct socket. Connect the parallel wires when generator is off. Parallel wires are not necessary when only one generator is being used.
- Page 34 LOW IDLE Connect the Negative (Black) cable first. Then connect the Positive (Red) cable. Do not reverse these cables and take care as to not let the cables touch eachother or other items.
- Page 38 SUA2000iD Torch...
- Page 47 A-iPOWER WARRANTY REGISTRATION FORM Register your product by mailing this form to support@a-ipower.com or register online at www.a-ipower.com. Registering your product is important, it provides protection: 1) You have record of product purchased. 2) Customer Service can Better serve you for Warranty related issues.
- Page 48 10887 Commerce Way Unit A Fontana CA 92337...
Need help?
Do you have a question about the SUA2000iD and is the answer not in the manual?
Questions and answers