Page 2
04/01/02 WEEKLY MAINTENANCE ♦ Lubricate Cable regularly with W-D 40 to make sure hoops slide on cable properly. ♦ Check v-belt for wear and if worn replace and check v-belt to see if it needs to be tightened. ♦ If tarp system is a chain drive system, lubricate chain regularly to prevent rust build ♦...
Page 3
04/01/02 TROUBLESHOOTING Tarp does not slide properly ♦ Check timing of tarp. Timing means that the Double rear hoop must be parallel on the drivers & passenger’s side when the tarp is in the open position. If the distance is not the same, change the hoop position, which is closest to the 1” front shaft by loosening the ¾”...
Page 4
04/01/02 Tarp is lifting while in Transport ♦ Check Safety latches to see if they are positioned properly. The ½” x 8” hex bolt assembly (B) should be inserted through the top hole of the support bracket (C) and through the ½” hole in the trailer sideboards. Tarp Material is wearing Prematurely ♦...
Page 5
04/01/02 At the solenoid double-check all connections to make sure they are all tight and clean. When the open and close switch is pressed the solenoid should make a clicking noise. i. If the solenoid clicks when the switch is pressed both ways then there is a problem with the wire running from the solenoid to the motor.
Page 6
IF USED ON A TRAILER Warranty Michel's Industries warrants their products for a period of one year from date of purchase. Any parts returned to Michel's Industries LTD. will be shipped prepaid and will be returned F.O.B. St.Gregor, Sk. Canada. We will not assume responsibility for shipping, labor or travel expenses.
Need help?
Do you have a question about the Gravel Guard and is the answer not in the manual?
Questions and answers