Westfalia TC1840A Instruction Manual page 13

Required Tool

For mounting the transport cart you will need a large slot
screwdriver and open-end wrenches in the sizes 10, 13 and 14.

Remove all parts from the packaging and check if all parts are
complete. Please ask a second person to assist you while mounting
the transport cart.
Mounting the Rear Axle Support
1. Mount the rear axle support (6) together with the left and right axle
braces (7 and 8), as shown in the drawing. For mounting, use the
M8x20 mm screws (21) together with the washers and nuts.
2. Install the wheels on the rear axle support. Tighten the wheels with
the washers, the screws and nuts.
Mounting
1
9
6
8
7