Philips DC350V37 User Manual page 27

• Replace the battery.
•
Aim the remote control directly at the sensor on the front of the unit.
Poor radio reception
• Increase the distance between the unit and your TV or VCR.
•
Fully extend the FM antenna.
Clock setting erased
•
Power has been interrupted or the power cable has been disconnected.
•
Reset the clock.
Sound input to the microphone cannot be heard clearly
•
Speak closer to the microphone when talking, or talk louder.
•
Reduce or remove background noise.
• Reduce the volume of the unit to remove an echo.
Audio quality is poor after connection with a Bluetooth device
•
The Bluetooth reception is poor. Move the device closer to the unit, or remove
any obstacle between the device and the unit.
A device cannot connect with the unit
• The device does not support Bluetooth communication, or any of the compatible
profi les required for the unit.
• You have not enabled the Bluetooth function of the device. Refer to the user
manual of the device on how to enable the function.
•
The device is not correctly connected.
with a Bluetooth device' on page 21 )
• The unit is already connected with another Bluetooth device. Disconnect the
connected device, then try again.
The connected mobile phone connects and disconnects constantly
• The Bluetooth reception is poor. Move the mobile phone closer to the unit, or
remove any obstacle between the mobile phone and the unit.
•
Some mobile phones may connect and disconnect constantly when you make or
end calls. This does not indicate any malfunction of the unit.
• For some mobile phones, the Bluetooth connection can be deactivated
automatically to save power. This does not indicate any malfunction of the unit.
28 EN
DC350_37.indd DC350_37.indd 28 28
Connect the device correctly. (see 'Connect
12/31/2008 12/31/2008 3:43:59 PM 3:43:59 PM