Philips DC350V37 User Manual page 23

Note
•
Only the latest volume setting for alarm tone works.
Tip
•
To view alarm time, press
Set alarm mode
1
Adjust the iPhone/iPod-RADIO-BUZZER control on the main unit to select the
source for the alarm.
»
Tip
•
If iPod/iPhone source is selected but no iPod/iPhone is loaded, the buzzer is selected automatically.
Activate and deactivate the alarm timer
Note
•
An alarm can sound only in the standby mode.
1
Press repeatedly ALM 1 or ALM 2 on the main unit to activate or deactivate the
timer.
»
»
Turn off the alarm tone
During an alarm tone, you can select one of the following to turn it off.
• Press
»
• Press
»
• Press
»
24 EN
DC350_37.indd DC350_37.indd 24 24
ALM 1 or ALM 2 repeatedly until alarm time is displayed.
When the alarm time comes, the selected Phone/iPod, or radio or buzzer
turns on.
If the timer is activated, is displayed.
If the timer is deactivated, disappears.
POWER .
The alarm timer remains activated.
REPEAT ALARM on the main unit.
The alarm call repeats at 9-minute intervals.
ALM 1 or ALM 2 on the main unit.
The alarm timer remains activated.
12/31/2008 12/31/2008 3:43:58 PM 3:43:58 PM