Table of Contents
Advertisement
Rear view
⑴ DC 12V IN: Connect with DC12V 4-pin XLR power adapter.
⑵ TALLY Light: Red, Green and Yellow 3-color TALLY indicator
⑶ Battery mount:
Connect with SSL-JVC50 battery (optional) to power the monitor.
⑷ SDI-OUT: HDMI converted to SDI output (BNC connector)
⑸ ⑹ SDI LOOP1/2: HD/SD-SDI loop through output (BNC connector)
⑺ HDMI-IN: HDMI input
⑻ TALLY controlling port (RS-232): terminal description is as follows:
The RED light is on when connecting the terminal "R" with "GND", and goes out when disconnecting.
The GREEN light is on when connecting the terminal "G" with "GND", and goes out when disconnecting.
The YELLOW light is on when connecting the terminal "Y" with "GND", and goes out when disconnecting
⑼ HDMI-LOOP: HDMI loop through output
⑽ ⑾ SDI IN1/2: HD/SD-SDI input (BNC connector)
⑿ CVBS-IN: Composite video input (BNC connector)
Input formats
Input
CVBS
HDMI
SMPTE-274M
SDI
SMPTE-296M
SMPTE-125M
ITU-R BT.656
All manuals and user guides at all-guides.com
Terminal
1
2
Description
Y
Supported formats
PAL / NTSC
480I / 576I / 480P / 576P
1080i (60 / 59.94 / 50)
720p (60 / 59.94 / 50)
1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)
1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
720p (60 / 59.94 / 50)
480i (59.94)
576i (50)
3
4
5
6
G
R
7
8
9
GND
GND
GND
Advertisement
Table of Contents
