Safety Labels - Sharp MAX-PRO 1182 Operator's Manual

SAFETY LABELS

General Danger Label
This label is located on the Sharp MAX-PRO wherev-
er a removable shield or panel guards electrical com-
ponents to warn of potential danger behind shield or
panel. Always disconnect electrical power from ma-
chine prior to removing any guards and/or panels with
this label.
Electric Shock/Electrocution Label
This label is located on the Sharp MAX-PRO wherev-
er a removable shield or panel guards electrical com-
ponents to warn of potential danger behind shield or
panel. Always disconnect electrical power from ma-
chine prior to removing any guards and/or panels with
this label.
Side Crush
MAX-PRO Operator Manual
EQUIPMENT SAFETY FEATURES
SECTION 1 - INTRODUCTION
This label is placed onto removable shields, panels, or
guards near the Sealing Jaw of the Sharp MAX-PRO
to warn of potential crush danger. Always disconnect
electrical power from the machine prior to removing
any guards and/or panels.
Burn Hazard Label
This label is placed onto removable shields, panels, or
guards near the Heated Sealing Area of the Sharp
MAX-PRO to warn of potential burn danger. Always
disconnect electrical power from the machine prior to
removing any guards and/or panels.
Entanglement Hazard, Rotating Parts
This label is placed where there is the potential of your
hands, long hair, jewelry, etc., becoming entangled
between two rotating parts. Be sure to secure loose
items before approaching and operating the machine.
Moving Parts Can Crush And Cut (Pinch Point)
1-3
Original Printed in English