Loading Bag Film - Sharp MAX-PRO 1182 Operator's Manual

A decal showing the film threading path through the
machine is located on the Frame Cover.
WARNING!
Use extreme caution when feeding bags into
machine; electrical voltage and possible pinch
points are present.
Note: At this point, in most cases, you would center
the bags to the Drive Roller. Place box of bags behind
the bagger so the perforation of the first bag opens
toward you when standing behind box.
1. Raise the Cradle, Printhead Cradle, and Unwind
Cradle by rotating the Latches and open the Cra-
dles.
While standing at the right side of the machine,
2.
feed film over Drag Tube of Box Tray.
MAX-PRO Operator Manual
SECTION 3 - SET-UP & OPERATION

LOADING BAG FILM

Then under-over Unwind Drag Tubes, then under
3.
Idler Roller, finally over the Unwind Drive Roller.
Close Unwind Cradle Latch. Position Weight
Straps over Box Tray Drag Tube.
3-5 Original Printed in English