Advertisement
Start the device
1. Check the plug is switched on at the wall socket.
2. When the power is turned on the screen should power up.
3. After a few seconds, if the screen is still blank, take the TV
remote control, point towards the bottom center of the screen
and press the power button.
4. Please note: The connection sensor varies on different models
and, if necessary, move the controller along the base of
the device while presseing the power button until the screen
turns on.
MULTITOUCH SOLUTIONS
For more exciting multitouch products visit
3
inserttouchscreen
www.promultis.info
or call +44 (0) 239 251 2794
Advertisement
